Model #11624212400 KENMORE Vacuum, Canister

  • Canopy/base/wheels
    3 Results
  • Hose And Attachments
    3 Results
  • Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

Cord gets hot and melts 11624212400 Kenmore Canister vac

A:

The outlet cord is getting hot due to high current draw. You likely have a short circuit in the vacuum motor or the wiring. I recommend that you discontinue using the vacuum cleaner and have it serviced.

 

If you need more help, let us know. 

Read More
Lyle W -
Sears Technician
November 12, 2013
Q:

NEED A WIRING DIAGRAM FOR A KENMORE CANISTER VAc MODEL 116-24212400.

A:

Replacing a part on a vacuum can be pretty difficult without the proper instructions. I did some research on the subject and provided a link, I hope this will be helpful until an expert responds to your question. The link is attached below.

Read More
Yadira B -
August 21, 2012
A:

Thank you for your question on the wiring of the canister vacuum.

I will try to find you a wiring diagram for the vacuum cleaner but there usually is on the underside of the motor canopy. Is it not legible?

I will have to wait for the manufacturer to send me a copy, and then I will forward it onto you.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
August 22, 2012
See more answers
Q:

How to snap in place vac hose cover for swivel connector ?

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
January 14, 2012
A:

Thank you for your question on the swivel connector cuff.

If you will notice on the swivel, that there are two plastic tabs molded into the swivel elbow.

If all the wires are in there correct orientation on the swivel you should be able to pull the cuff up from the hose and align the mold seam on the cuff with the tabs on the swivel and work it up into place.

I'll grant you it is not real easy. But if you have it aligned and everything tucked in you should be able to work it up onto the swivel.

Sam A.

Read More
Sam A -
Sears Technician
January 16, 2012
See more answers

Top Parts