Model #11623513301 KENMORE Vacuum, Canister

  • Canopy/bag
    3 Results
  • Hose And Attachments
    3 Results
  • Cord Reel
    3 Results
  • Tool Caddy
    3 Results
  • Power-mate Jr.
    3 Results
Find part by diagram >

Question and Answers

Q:

Replace hose 11623513301 Kenmore Vacuum cleaner

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your vacuum. Upon researching model 11623513301:  You will need some basic tools. Two small pocket sized flat bladed screw drivers seem to work the best. Remove the swivel and hose from the vacuum.

At the swivel end look for the plastic mold lines on both the rubber cuff and the elbow of the swivel.

Once you locate those insert your flat bladed screw drivers into the swivel groove at the mold seam lines and pry under the cuff and slide the screw driver back under the cuff about 1 1/2 inches to release the locking tab for the cuff on both sides of the swivel.

Once you have this done you should be able to slide the cuff up the hose and expose the wire harness and how they lay in the holders. Make note of the wire harness routing so you can install them the same way on the new swivel assembly.

If you do not get them correct, the cuff will be very difficult to get to slide up and lock.

You will now see the locking tab on the swivel that hooks onto the corrugated hose, Flex to release and remove the swivel from the hose. Re-assemble in reverse order.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
April 30, 2015
Q:

Kenmore Vacuum Model 11623513301 Won't Turn On 11623513301 Kenmore Vacuum cleaner

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your vacuum. Upon researching model 11623513301; it sounds like you may need to replace the handle switch. The handle switch allows the vacuum to turn on and turn off so when it fails it can cause the vacuum not to turn on. You can unplug the vacuum cleaner and remove the handle switch, the handle switch can be tested for continuity using a multi meter with the switch in the on position. I have posted a link of the switch to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 18, 2015
Q:

requesting help finding a part to my vaccum 11623513301 Kenmore Vacuum cleaner

A:

Thank you for visiting ManageMyLife.com

I can understand your confusion when trying to locate parts for the power mate. The kenmore canister vacuums actually have two model numbers. One for the canister and one for the power mate. I'm showing the model number for your power mate is 116.53513301. I have also located the wheels for you and included the link below where you can order the part.

PowerMate Wheels for Model 116.53513301

If you have further questions please let me know.

Thanks for using ManageMylife.com

Read More
Desirea -
Sears Technician
August 30, 2013

Top Parts