Model #1162324390 KENMORE Vacuum, Canister

  • Canopy/body/wheels
    3 Results
  • Hose And Attachments
    3 Results
Find part by diagram >

Question and Answers

Q:

Cannister Vacuum hose replacement #1162324390

A:

Replacing a part on a vacuum can be pretty difficult without the proper instructions. While your waiting for a detailed reply from an expert. I have provided the link below. Good luck on the repair.

Read More
Yadira B -
October 03, 2012
A:

I know that it can be very frustrating when you don't have the right information for your vacuum. I have provided you with a few images below showing how to replace the hose on your vacuum. The image has full instructions for removing the handle end of the hose. You will need to release tabs for the collar on the swivel assembly that is on the other side of the hose. The tabs on the collar are orientated along the plastic seams of the collar. You may be able to twist the tabs of the collar off of the tabs on the swivel as you did for the handle collar. This will take significant force on the swivel side. If you are not able to twist and release the tabs, you will need to pry outward with small flat tip screw drivers on the collar as shown in the second image below to release the tabs on the swivel. Once you release the collar, you can switch out the hose in the same manner as you did on the handle connection. I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
October 03, 2012
See more answers

Top Parts