Model #11622813201 KENMORE Vacuum, Canister

  • Hood/base
    3 Results
  • Hose And Attachments
    3 Results
  • Power Cord Reel
    3 Results
  • Tool Caddy
    3 Results
  • Hood/base
    3 Results
  • Hose And Attachments
    3 Results
  • Power Cord Reel
    3 Results
  • Tool Caddy
    3 Results
Find part by diagram >

Question and Answers

Q:

vacuum hose handle assy 8174837 11622813201 Kenmore Vacuum

Q:

How do I replace the pipe connection(4370563) on my vacuum cleaner hose?

A:

The rubber part on the end of your old hose is called a hose adapter. The adapter has a slightly raised molded joint on it. Place a small screwdriver at each end of the molded joint and push it underneath the joint 1- 1 1/2 inches. These screwdrivers will release a tab underneath the molded joint and the hose adapter will slide off the swivel attachment.

Read More
Jimmy K -
Sears Technician
December 18, 2009
Q:

Can you send directions on how to replace part 4370563 on my vacuum cleaner model 116.22813201?

A:

I am sending you 3 images showing removing and replacing the connector and the latch that holds it.

Use a small screwdriver as shown to release the tabs on the latch on the connector. When the latches are released the latch assembly and the terminal plate will slide out of the connector. Notice how it comes apart for easy installation of the new one.

When the terminal plate is removed the adapter and hose will slide off the connector. Release the tabs that hold the hose to the adapter and put the hose on the new adapter if you have one.

You need to position the terminal plate inside the adapter before sliding the adapter and hose on the new connector.

The latch and terminal plate have to slide under the small guides on the connector.

Read More
Jimmy K -
Sears Technician
June 05, 2009

Top Parts