Model #11620712007 KENMORE Vacuum, Canister

  • Vacuum Cleaner
    3 Results
  • Hose And Attachments
    3 Results
  • Power Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

Can the powermate be replaced?If so, How much? Or, parts information please 11620712007 Kenmore Canister vacuum cleaner

A:

Thank you for choosing SearsPartsDirect.com. That is a great question! For your Canister vacuum, model number 11620712007, I do have the complete powermate head available. The part number is KC50XBZTZU01. You can give us a call at 1800-366-7278 or you can click here to get that powermate ordered. I hope this helps you! Have a great day!

Read More
Samantha A -
Sears Technician
February 14, 2014
Q:

Vacuum doesn't run 11620712007 Kenmore Canister vacuum cleaner

A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your vacuum cleaner not working. We are here to help. Based on the symptom, I suspect one of the following parts is open on the vacuum cleaner. The parts are, thermal fuse, on/off switch on canister, cord wheel. or a disconnected wire. Those parts need to be checked with a multimeter. The image below shows how to open the canister vacuum cleaner to access the parts. The part that check open with the meter, needs to be replaced. I hope this helps.
 
To order vacuum cleaner parts, please visit SearsPartsDirect.com with the model number.
 
Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.
 

Read More
John H -
Sears Technician
October 21, 2013
A:

Hello John - Thanks for the comments! I don't see an image included with your note, but I followed a link to a parts diagram and think I understand how to dis-assemble the vacuum. I could, however, use a wiring diagram - it doesn't appear the parts diagram I found here: http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Vacuum-Parts/Model-11620712007/0582/0642000/P0011271/00001?blt=06&prst=0&shdMod=11620712007 shows any of the electrical parts you mention in your note. Please forward any documentation you think may help. Thanks again!

Read More
Joe -
October 21, 2013
A:

Joe, I posted the wiring schematic on the image below. Also, check the security and privacy setting on the browser. Something is blocking the html images.

Read More
John H -
Sears Technician
October 22, 2013
See more answers
Q:

hose replacement 11620712007 Kenmore Canister vacuum cleaner

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Alina -
June 27, 2013
A:

Replacing this fitting can be a little tricky. I will try to explain how to do this the best I can. I included some pictures below.

  • First you will need two small pocket flat blade screwdrivers.
Where the hose cuff slides over the swivel pipe location there is a gap where the two join. If you look closely you will see on both sides of the cuff the seams from the mold that made the cuff.
  • This process has some danger of poking you hands with the screwdriver, so be very careful.
Insert the tip of the thin flat bladed screwdriver under the cuff at the seam line and slide it towards the hose about 1" two release the locking tabs the holds the hose cuff onto the pipe. Do this on both sides simultaneously and then pull the hose cuff forward up the hose.
  • If you do not do both sides at the same time it will not come off.
At this time you will expose the wire connections and take note of the position of the wires before you remove them from their connection location.You will need to position them in the same order when your'e reinstalling the pipe onto the hose.The wires fit in little locking slots on the side of the elbow pipe. Lift the hose plastic locking tab to release the pipe from hose assembly. When you are re-installing the new elbow pipe reposition in the same location and reconnect the push in wire connectors in their correct order. Locate the locking tabs on the inside of the cuff and align the seams with the seam on the elbow and slide the cuff back over the pipe and make sure it is secure.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Read More
Desirea -
Sears Technician
June 27, 2013
A:

The pictures are not included. Would you be able to resend them? Thank you

Read More
Ronald -
June 27, 2013
A:
Desirea -
Sears Technician
June 27, 2013
A:

would you please verify the model number (11620712007). the picture and instructions do not match my vacuum? thank you.

Read More
Ronald -
June 29, 2013
A:

Thank you for the response and for using ManageMyLife.com. The instructions I gave previously was on how to remove the swivel from the hose connection adaptor. After doing some further checking in the service manual, I was able to come up with some additional detailed instructions to help you complete a seamless install for both ends of the hose.

I have included these instruction as attachments to this response as they are too large to copy and past in. Below the text, you should see the instructions in a thumb sized view that you can simply click on to pull them up. The hose connector or adapter between the swivel and hose will need to be cut off the original hose and if re-usable, heat sealed onto the replacement hose with a hair dryer or some other non-intensive heat source.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
June 29, 2013
A:

Thank you for alll your help! The attachment was not included. Would you be able to please resend it. Thank you again for all your time and dedication.

Read More
Ronald -
June 29, 2013
A:

The image maybe to Large, I will include the web address for you to Copy and Paste into your internet browser. There are two different links (one for each image) 

 

 

 

 

Read More
Desirea -
Sears Technician
June 29, 2013
A:

Here are the links. Image 1 http://www.managemylife.com/images/38583/original/vacuum_remove_hose.gif?1372530630 Image 2 http://www.managemylife.com/images/38582/original/vacuum_hose_replacement.bmp?1372530598

Read More
Desirea -
Sears Technician
June 29, 2013
See more answers

Top Parts