Model #11620612003 KENMORE Vacuum, Canister

  • Vacuum Cleaner
    3 Results
  • Hose And Attachments
    3 Results
  • Power Cord Reel
    3 Results
Find part by diagram >

Question and Answers

Q:

I am wanting a price for a power mate Jr. 11620612003 Kenmore Canister vacuum cleaner

A:

Thanks for the inquiry and for being a valued member.

Based upon the model number, I show the Power Mate Jr. as part number C85PAKS0VU06. It does not appear we stock it any longer, but if you Google the part number, you will more than likely find one still in circulation online for purchase. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 22, 2015
Q:

Directions and Diagram:How to replace Hose & Adapter for Vac #11620612003 11620612003 Kenmore Canister vacuum cleaner

A:

Thank You for contacting ManageMyLife.com

I understand needing further instructions regarding your vacuum hose and replacing the connection pipe.

To replace this connection pipe you will need to have some basic tools.

Two small pocket type flat blade screwdrivers seam to work the best for this repair.

Locate on the hose elbow connection the molded seam line in the cuff and on the elbow connection.

Place the flat blade screwdriver in the gap between the elbow and the hose cuff and work up under the cuff along the seam line up the hose in under the cuff for about 1 inch or until you release the locking tab.

Do this on both sides of the cuff, so both sides are released at the same time.

Once the tabs are released, slide the cuff up the hose and out of the way.

This will expose the wiring harness on the connection pipe. NOTE: the location of the wires and how they fit onto and around the connection pipe so you can install them back exactly as they are or the cuff with not lock back onto the connection pipe.

Remove the push in connectors on the wire harness and then locate locking tab on the connector pipe and release it from the spiral of the hose and remove the connection pipe from the hose.

Install the new connector and re-connect all the wires and slide the cuff back up the connector. This will take a little working back and forth of the cuff to get it to lock onto the new pipe.
I will include a couple of pictures to help you with the repair.

I hope this will help and if you need more help please reply and I will be glad to help you further.

Thank you for using Manage My Life.  

 


Read More
Desirea -
Sears Technician
September 21, 2013
Q:

How to install hose for sears vacuum 116.20612003

A:

When replacing a major part on a vacuum cleaner, Manage My Life is here to help. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I am also adding a second link in where you can enter your appliance model number and a parts list diagram will pop up to help[ you with your question. I hope my links are useful.

Read More
Joseph P. -
July 25, 2011
A:

The link above shows how to install the hose on Kenmore "116.21612002". I need the drawings for 116.20612003; it's similar but not the same.

Read More
Dave -
July 25, 2011
A:

Thank you for your question.

I can help you with changing the hose out on your vacuum.

The handle part is a little different than what you saw but not much.

You will need to remove the screws on the one side of the handle and then locate the last screw on the back of the handle that holds the switch cover on. You will then need to lift up and the switch cover from the back, and get it to snap free for the plastic tab on the under side. Make sure you make note of the locations of the wire harness and switch and how it fits into the switch cover.

You will then need to snap the two half's apart on the handle.

Once you have this done you will see the location of the hose wire harness and the routing grooves.

Release the tab at the back by the spiral of the hose to release the hose from the handle after pulling out the push-in connections for the hose into the wire harness.

Install the new hose with the wire locations and make sure they are routed correctly or you will not be able to close the two half's of the handle upon reassemble.

As for the other end for the angled swivel I will go into some detail.

116.2 vacuum cleaner hose elbow swivel replacement.

To replace this connection pipe you will need to have some basic tools.

  • Two small pocket type flat blade screwdrivers seam to work the best for this repair.

  • Locate on the hose elbow connection the molded seam line in the cuff and on the elbow connection.

  • Place the flat blade screwdriver in the gap between the elbow and the hose cuff and work up under the cuff along the seam line up the hose in under the cuff for about 1 inch or until you release the locking tab.

  • Do this on both sides of the cuff, so both sides are released at the same time.

  • Once the tabs are released, slide the cuff up the hose and out of the way.

  • This will expose the wiring harness on the connection pipe. NOTE: the location of the wires and how they fit onto and around the connection pipe so you can install them back exactly as they are or the cuff with not lock back onto the connection pipe.

  • Remove the push in connectors on the wire harness and then locate locking tab on the connector pipe and release it from the spiral of the hose and remove the connection pipe from the hose.

  • Install the new connector and re-connect all the wires and slide the cuff back up the connector. This will take a little working back and forth of the cuff to get it to lock onto the new pipe.

I will include a sequence of pictures to help you with the repair.

I hope these instructions will help. If you need more help please reply and I will be glad to help your further.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 27, 2011
See more answers

Top Parts