Model #11329991 CRAFTSMAN Saw Table

  • Figure 1
    3 Results
  • 10" Tilting Arbor
    3 Results
Find part by diagram >

Question and Answers

Q:

when was my table saw made: model # 113.29991

A:

Without the serial number we cannot give you the exact year of manufacturing. I do show that the literature for your table saw was published in 1996.

Read More
Alyse C. - Personal Solutions Manager -
Sears Technician
February 24, 2010
A:

My father received his table saw for Christmas in 1958 or 1959 I was 3 or 4 years old, the saw still works great.

Read More
Patrick -
November 09, 2013
A:

My dad bought his saw in 1959, he gave it to me about 10 years ago. It's still going strong.

Read More
Cougar82 -
December 10, 2015
See more answers
Q:

Craftsman 10� Bench Saw: Model: 113.29991 � How to lock saw blade for removal/installation.

A:

No worries! Manage My Life is here to help! The experts offer great advice and would be glad to assist you. It usually takes 24-48 hours to receive a response. Have a great day!

Read More
Jackie S -
July 29, 2011
A:

Thank you for your question on how to change the blade on the table saw.

All you need to do is use a block of wood to wedge between the blade and the table top or housing to hold the blade either with installing or removing the blade.

I have given you an image below from a table saw manual that will illustrate this process.

I hope this will help.

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
August 01, 2011
See more answers
Q:

Craftsman 10� Bench Saw: Model: 113.29991 � Hand Wheel Assembly Part #: 6579 � How to remove?

A:

Manage My Life is a great website to speak directly with an expert to help you every step of the way to help you solve your problem. An expert will have an answer to your question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
July 21, 2011
A:

Thank you for your question.

I can understand wanting to get the handle off the saw.

Make sure that there is not another Allen set screw. It does no show another one in the parts but it is possible.

If you can wobble the handle on the shaft then it is loose and should come off, but if it is tight then it is still seized and you may have to use more Liquid Wrench to get it loose.

If it is loose but will not come off sometimes the set screw will make a burr on the shaft and prevent the handle for coming off. If you can get a large adjustable wrench behind the handle on the shaft you may be able to tap it forward to impact it off.

I hope these suggestions will help you get the handle off.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
July 22, 2011
A:

Dear Sam A, Thank you very much; I needed your feedback before getting aggressive with the handle. I did as you suggested, i.e. the shaft did have a burr on it; I got the handle off filed down the burrs and I am in business. Thank you for your expert advice! Ed

Read More
Ed -
July 24, 2011
See more answers

Top Parts