Model #113299040 CRAFTSMAN Saw Table

  • Unit Housing
    3 Results
  • Motor Base Assembly
    3 Results
  • Fence Assembly
    3 Results
  • Miter Guage Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Switch Box Assembly-domestic
    3 Results
  • Switch Box Assembly Supplied In Canada Only
    3 Results
  • Legs
    3 Results
  • Table Extension
    3 Results
Find part by diagram >

Question and Answers

Q:

Won't stay alligned 113299040 Craftsman Craftsman 10 inch table saw

Q:

Table top to housing 113299040 Craftsman Craftsman 10 inch table saw

A:

Thank you for your inquiry on your Craftsman Table Saw, Model: 113.299040. On reviewing your model of Table Saw, it appears that due to the age of the table saw the information on the housing is no longer available due to the fact that it’s been discontinued. I was trying to see if I could find a picture of the housing, unfortunately the only thing I was able to pull up was the diagram which only shows one side.

I hope this answered your question. Thank your for contacting SearsPartsDirect.com and have a wonderful day. 

Read More
Gerry93 -
Sears Technician
February 05, 2015
Q:

Replace pulley that holds belt on tablesaw 113299040 113299040 Craftsman Craftsman 10 inch table saw

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

Looking at the information I’m showing that shaft that comes off that motor should have a flat side. The screw should be pressed onto that side of the motor shaft. Hope this helps.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
Samantha A -
Sears Technician
November 03, 2014

Top Parts