Model #113298470 CRAFTSMAN Saw Table

  • Unit Housing
    3 Results
  • Motor Base Assembly
    3 Results
  • Fence Assembly
    3 Results
  • Miter Guage Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Switch Box Assembly-domestic
    3 Results
  • Switch Box Assembly Supplied In Canada Only
    3 Results
  • Legs
    3 Results
  • Table Extension
    3 Results
Find part by diagram >

Question and Answers

Q:

10" table saw motor model 113.298470 Craftsman Craftsman 10 inch table saw

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when needing parts for the table saw.
 
Glad to help out.   Im  looking at your Craftsman Table Saw model number 113.298470.
 
To get a new table saw motor for your model it is said you need both these parts to do it.

Motor part number 820176
Motor bracket number 69184

For the good old table saw this is the motor and bracket for the 113.298470.   Also if you like to get that and want to save money and get free shipping.   Contact our Sears Parts 1-800-366-7278 and ask for free shipping.   Saves money.
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
July 11, 2014
Q:

need replacement will for saw 113298470 Craftsman Craftsman 10 inch table saw

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Based upon the manual's accessory page on page 33, the caster numbers used for the stand were 9-22209 and 9-22201. Those have both since been discontinued by the manufacturer and are no longer being offered at this time. 
For convenience, I have provided a blue link below that you may click on to be directed to the Sears.com to view the current selection of casters available for the table saw stands. Hope this helps.

Sears.com Casters for Table Saw Stands


Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
March 22, 2014
Q:

113.370200 voltage change 10" Tablesaw

A:

 Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Yadira B -
June 30, 2013
A:

here is the label. I can post one of the terminals if need be.

Read More
Brian -
June 30, 2013
A:

here is the terminal board. upper left #1 lower left #2 center #2 upper right #4 lower right #5 Red and yellow come from capacitors.

Read More
Brian -
June 30, 2013
A:

 Hi,

Thanks for contacting  ManageMyLife. I understand how frustrating it is having trouble with your appliance.

I have some wiring directions you can use to wire the dual voltage motor for the table saw.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
July 01, 2013
A:

Thanks for the fast response. But now I am only more confused. As you can see the schematic you posted and the label on the motor are not at all similar. Different color wires, not sure what to do.

Read More
Brian -
July 01, 2013
A:

oh and disregard the earlier comment about Red and Yellow going to capacitors. Not sure why I thought that.

Read More
Brian -
July 01, 2013
A:

Line one will got to the red wire,,line 2 will go to the black and the white will go to the brown or terminal 3 connector Use the bottom right diagram..

Read More
Bill__W -
Sears Technician
July 03, 2013
A:

Ok Bill, why does the lower right diagram say lower nameplate voltage? Is that 110v. I got the motor running but it gets very hot! It doesn't smoke or trip the breaker but the shaft gets to hot to touch with bare hands. I did notice that the most clear part of the remaining label shows the starting capacitor going to terminal 5(black wire) and yellow going to terminal 3 not the brown as you instructed. Could this heat be a problem with the running capacitor? I know little about this and have yet to test the capacitor to see if it is faulty. Also you instructed white go to terminal 3 or brown. Are you referring to neutral? Running 220v this is just a 2+ground right?

Read More
Brian -
July 06, 2013
A:

Brian, Bill is on vacation and I will try to assist you with this problem. Now, if the capacitor was not changed with the motor, it could be causing this problem. The new motor may need a different size capacitor. The motor should have the information for the capacitor it needs, listed on it. Now also check the back side of the plate that covers the wires, in many of these motors, it will have the wiring information. I hope this will help you.

Read More
Scott D -
Sears Technician
July 08, 2013
A:

Ok Scott as I mentioned in my first post there is no diagram on the cover. The Capacitors came with the motor from Sears when I purchased the motor. This past weekend was the first time ever put power to it, and as I said it was purchased quite a while ago maybe around 2002?

Read More
Brian -
July 08, 2013
See more answers

Top Parts