Model #113298240 CRAFTSMAN Saw Table

  • Unit Housing
    3 Results
  • Motor Base Assembly
    3 Results
  • Fence Assembly
    3 Results
  • Miter Gauge Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Power Outlet
    3 Results
  • Leg Set
    3 Results
  • Table Extension
    3 Results
Find part by diagram >

Question and Answers

Q:

When was my table saw made? 113.298240

A:

Thank you for choosing Sears PartsDirect.com. Glad to help out. I'm looking at your model number 113.298240 and the unit was manufacturer 1984 per the owner’s manual. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
January 27, 2015
Q:

Caster Assembly 113298240 Craftsman Craftsman 10-inch table saw

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the parts for the caster assembly on your Craftsman 10-inch table saw model 113298240. I am sorry the springs for the foot levers need to be replaced. In this case, the springs, as well as the casters, are no longer available.  I am so sorry we cannot get the springs for you. As an alternative, I was able to locate a mobile base that may work in place of the casters. I have included the link below for you to view the part.

Craftsman Mobile Base

I hope this answers your question. Thank you for choosing Sears, we appreciate your business.

 

Read More
Rachel Morgan -
Sears Technician
October 11, 2014
A:

Linda, Many thanks. I'll look into it. Philip

Read More
Philip -
October 12, 2014
See more answers
Q:

Where can I get a dado blade insert for my mod.113.298240 sears table saw? Thanks 113298240 Craftsman Craftsman 10-inch table saw

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
According to the owner's manual's recommended accessory chart on page 35, the dado blade insert is part number 9-29997. 
For convenience, I have included a blue link below that you may click on to be directed to the SearsParts site to purchase the insert when needed.

Dado Insert for Model 113.298240

Hope this helps and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
April 12, 2014

Top Parts