Model #113298142 CRAFTSMAN Saw Table

  • Unit Housing
    3 Results
  • Motor Base Assembly
    3 Results
  • Fence Assembly
    3 Results
  • Miter Gauge Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Power Outlet
    3 Results
  • Leg Set
    3 Results
  • Table Extension
    3 Results
Find part by diagram >

Question and Answers

Q:

Arbor size for the 113.298142 113298142 Craftsman Craftsman 10-inch table saw

A:

Really? No one knows what replacement saw blade I need for the 113.298142?

Read More
Nick -
October 13, 2015
Q:

How do I remove pulley from 113.298142 table saw. Trying to replace the woodruff key. 113.298142

A:

Thank you for choosing Sears parts direct. I will be happy to help with your table saw. Upon researching model number 113.298142; the set screw is the only thing holding it on. It sounds like it may have stuck to the shaft with usage. Try using wd-40 or a lubricant to loosen it up. A soft mallet may also loosen it.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
July 23, 2015
A:

The pully is not stuck. It spins freely on the shaft, which is the ultimate problem that I am attemting to remedy. However, it only slides back and forth on the shaft a very short distance. A question - Should I be able to remove the pulley without having to disassemble the saw? Even if it were to move off the shaft I'm not sure there is enough room inside the housing for it to come off.

Read More
Paul -
July 24, 2015
See more answers
Q:

Replacing Arbor Housing on Table Saw Model 113.298142 Craftsman Craftsman 10-inch table saw

A:

 
Thank you for choosing Sears Parts Direct. I can certainly assist you in locating the instructions to replace the arbor housing on your table saw. I did look into the model number you have provided and I have found information that will assist you. 




To replace the housing, arbor, start by removing the drive belt and the blade.

Look on your parts diagram or go to www.searspartsdirect.com to see a a parts diagram for the saw.

Remove the retaining ring (item 63) and the housing will slide off the shaft on the cradle (item 41). You will have to remove the pulley from the arbor shaft and install it on the new one.


I have found a video that may assist you. Click here to view. 

Let me know if this helps.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 15, 2014
A:

Thank you for the information. The issue started when the blade lift assembly completely jammed. After flipping the saw and removing the outer housing, an attempt to free up the lifter screw assembly broke several teeth on the arbor housing. While a thorough cleaning and lubrication of the screw assembly solved the "frozen part" problem, the missing teeth limited overall blade elevation height. After deciding to initiate a full repair, my attempt to remove the arbor housing did not work as it would not slide off the cradle shaft, even with the application of moderate force. As you indicated this was designed to do so, a closer inspection revealed what appeared to be a small spur at the end of the shaft. With a bit of lubrication and some minor filing, the housing did finally come off. I have ordered a new arbor and the assorted O-rings, washers, retainers, etc. to completely refurbish the screw lifter assemble as I reassemble this unit. This was my first saw, probably well over 30 years old, and I believe it will now have a continued role to play in my shop for many years to come. I appreciate the guidance and the availability of parts to allow this "favorite" tool a new life.

Read More
GEORGE -
May 15, 2014
A:

That is great to hear. I am glad the arbor housing was able to come off and you still are able to use your saw. 
Thank you for choosing searspartsdirect.com. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 16, 2014
See more answers

Top Parts