Model #113298032 CRAFTSMAN Saw Table

  • Unit Housing
    3 Results
  • Motor Base Assembly
    3 Results
  • Fence Assembly
    3 Results
  • Miter Gauge Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Power Outlet
    3 Results
  • Leg Set
    3 Results
  • Table Extension
    3 Results
Find part by diagram >

Question and Answers

Q:

Sears craftsman 10'' table saw 113298032 Craftsman Craftsman 10-inch table saw

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the oil for your Craftsman table saw model 113298032. I will be happy to help you with this. I have included the link below for you to view the owner’s manual online.

The lubrication instructions are on page 33 of the manual. You should use SAE no. 20 or no. 30 engine oil. There is also a diagram showing all the parts that need lubrication. Any other maintenance on the motor needs to be performed by a qualified technician. 

SAFETY WARNING: Disconnect the power supply before beginning your maintenance to prevent the risk of the saw accidentally starting which can result serious cuts or electrical shock which can result in property damage, serious personal injury or even death. Internal parts may have sharp edges that can cause serious cuts. Use caution and wear work gloves. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 
 
I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
June 27, 2015
A:

The electric motor that is now on the saw is probably not the original motor. The motor is model 62618. I am sure the home-owner is supposed to lubricate the motor because there are two yellow caps that say OIL. There is one on each end of the motor. They just pop off and it would allow you to oil those places. It may be an old motor but it seems to run well. I just don't want it to burn up. Just want to know what oil and how much. Thank you for your time

Read More
Philip -
July 01, 2015
See more answers
Q:

Age of tablesaw 113298032 Craftsman Craftsman 10-inch table saw

A:

Thanks for the inquiry and for being a valued member.

Based upon the model number of the table saw, we show this unit was manufactured in 1984. It's about 31 years old. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
April 27, 2015
A:

thank you

Read More
Patrick -
April 28, 2015
See more answers
Q:

dado insert 113298032 Craftsman Craftsman 10-inch table saw

A:

Thanks for the inquiry and for being a valued member.

Based upon the accessories section on page 35 of the owner's manual, it states the dado insert as part number 9-29997. That insert is still available for purchase. I have linked it below.

Dado Insert for Model 113.298032

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
February 23, 2015

Top Parts