Model #113295750 CRAFTSMAN Saw Table

  • Unit Housing
    3 Results
  • Unit Breakdown
    3 Results
  • Fence Assembly
    3 Results
  • Miter Gauge Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Leg Set
    3 Results
  • Table Extension
    3 Results
  • Motor/control Box
    3 Results
Find part by diagram >

Question and Answers

Q:

stopped running 113295750 Craftsman Craftsman 10 inch motorized saw

A:

Thank you for your question.  I am sorry you are having a problem with the saw. if the motor will not start, I recommend checking the outlet first. plug in a known good tool and see it is works. if it does, the outlet is fine. if the motor still will not start when you push the button, you will need to do some internal electrical checks. if you have a meter, I recommend following the diagnostic instructions found in your owner's manual.  You may download a copy from Sears Parts Direct using the model number 113.395750 and select Manual Link in web site.  I hope this is helpful. please let me know if you need further assistance.  This could be the switch, brushes, or power cord.

http://www.searspartsdirect.com/

 Once problem is diagnosed, I would recommend video search on the internet to repair or replace the part.

Read More
Chris8491 -
Sears Technician
August 12, 2015
Q:

Wiring Diagram for Motor Control Box of a 10" Craftsman table saw (1970s vintage) Model No. 113.295750C, Ser. No 171909.

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about a wiring diagram for your Craftsman table saw model 113.295750C. I am so sorry replacing the capacitor did not resolve the issue. I understand wanting to complete the repair yourself. In this case we advise against it. 

This product has a double insulated system. Any repair of this tool requires dielectric testing to ensure the operator’s safety. To avoid the possibility of alteration or damage to the double insulated system, service should only be performed by your nearest Sears repair center. The repair must be completed using the necessary diagnostic and testing equipment to assure continued compliance with applicable UL requirements. After the completion of the repair, the product must be checked using high voltage testing equipment to prevent a severe shock hazard which may occur if the part is not properly installed and tested.  

For these safety reasons we do not have a technical manual or electrical diagram that we can provide you. 

Here at SearsPartsDirect.com we love to help you with your do-it-yourself repair projects, but in this case, for your safety, the router should only be repaired by a qualified technician with the proper testing equipment. Thank you for your understanding in this matter and thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
July 11, 2015
A:

Sounds good and well BUT what's do I take my saw to get it repaired. I went into the service center in Calgary, Alberta, Canada and I may as well have talked to a tree!!!! Please advise of a service center that would be satisfactory.

Read More
Allan -
July 11, 2015
A:

Make that where do I take my saw for repair?

Read More
Allan -
July 11, 2015
See more answers
Q:

relay 113295750 Craftsman Craftsman 10 inch motorized saw

A:

 

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize, when a part is no longer available by the manufacture there are no subsititutes. You will need to find a used part or purchase a new unit. After 5-10 years the manufacture stops selling parts for certain units.


 You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
November 14, 2014

Top Parts