Model #11324610 CRAFTSMAN Drill Press

  • Unit Breakdown
    3 Results
  • Spindle Pulley Assembly And Guard
    3 Results
  • Spindle Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Is there an adjustment to make in order for spindle assembly to move up/down freely?

A:

First, the model number you submitted in not a valid number. Could it be 113.24610 instead of 113.24810? I do not have service manual or the user's manual for this 1972 model drill press, however there is a parts breakdown and image at Sears Parts Direct. I added the link to Sears Parts Direct below to click on. You can view the parts list. It may help you in seeing the related parts.

The spring most likely is not the problem; the spring is used to return/raise the quill tube back up when you release the handle. The quill tube or shaft may need cleaning and lubricated. The image should help you disassemble and remove the spindle assembly.

I recommend calling a service technician to repair your drill press.

Read More
Joey S -
Sears Technician
A:

Thanks Joey,the model number is right ,#315.10280 it is a hand held 1/2" Drill,I have a printout from Sears web site of the drill,i'am thinking they may have used locktight on the threads to hold it tight on the Gear & Spindle assy.

Read More
lwCompac -
December 21, 2010
A:

I have a Drill Press made in 1972 model 113.24810 and the control that raises/lower the drill bit assembly is not working freely. It seems to be stuck. Is there an adjustment spring that works on this? If there is an adjustment how do I adjust the spring? I asked for a manual and they don't seem able to find one. Don't know where this question came from,it's not a standup drill press.

Read More
lwCompac -
December 21, 2010
A:

Have same problem with mdl 113-24610, any suggestions?

Read More
Alfred -
December 26, 2014
See more answers