Model #113241730 CRAFTSMAN Saw Table

  • Unit
    3 Results
  • Figure 2 - Guard Assembly 814643
    3 Results
  • Figure 3 - Fence Assembly 814645
    3 Results
  • Figure 4 - Miter Gauge Assembly 814648
    3 Results
  • 9-inch Direct Drive Table Saw Model 113.241730
    3 Results
Find part by diagram >

Question and Answers

Q:

Fence operation 113241730 Craftsman Craftsman 9 inch direct drive table saw

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Craftsman table saw model 113241730.  I am so sorry you are having difficulty installing the fence. I will be happy to help you with this. I recommend you start by looking at the unit diagram. I have included the link below.

Unit Diagram for Craftsman Table Saw 113241730

The rip fence is key 15 in the diagram. This will help you orient the fence to the direction of the blade guard (key 28) and the location of the hand wheel (key 46). To help you further, I have included the link below for you to view a new table saw that has the same set up.

Table Saw

Because of the age of this product, the owner’s manual is not online. I have included the link below for you to order the manual. I think this is a good investment for any further questions you have about your table saw.

Owner’s Manual for Craftsman Table Saw 113241730

I hope this answers your question. Thank you for choosing Sears, we appreciate your business.

 

Read More
Rachel Morgan -
Sears Technician
November 05, 2014
Q:

Table Saw, Missing Table Screws

A:

Thank you for your question.

 

I am sorry you are having a problem with the saw. I will be happy to assist you. I looked up the model number you submitted. It looks like the bolts that secure the table extensions to the table are socket flat head screws. The image below shows what they look like. Just click on the image to enlarge it. The size of the bolt is 1/4-20x5/8". You should be able to pick these up at your local hardware store. If I remember correctly, the hole or holes used for mounting the extensions are slotted. This allows for adjustment of the extensions. If only one side of the slot is tapered, it may be that way so it pushes the extension tight against the table when it is tightened. If you could post an image of the slotted hole in question, I will look at it to be sure.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Mange my life.

 

 

Mark T.

Read More
Mark T -
Sears Technician
October 24, 2013

Top Parts