Model #113241680 CRAFTSMAN Saw Table

  • Unit
    3 Results
  • Arbor And Blade Assembly
    3 Results
  • Fence Assembly No. 62773
    3 Results
  • Miter Gauge Assembly
    3 Results
  • On/off Power Outlet No. 60381
    3 Results
  • Guard Assembly
    3 Results
  • Legs
    3 Results
  • Table Extension 62589
    3 Results
  • Motor No. 62855
    3 Results
Find part by diagram >

Question and Answers

Q:

I have this model and would like a fence for it. What does Sears offer that would be compatible with this model? 113241680 Craftsman 10-inch flex drive table saw

A:

Thank You for choosing Sears PartsDirect.com. Glad to help out. Im looking at your model number 113241680  and the part number for the fence is 62773. The manufacturer that originally made it for Craftsman no longer has the part available. Doing an online search through a thirdparty vendor that may carry an aftermarket item for the saw.  If you have further questions please resubmit your question for further information.

 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
April 09, 2014
Q:

reverse motor direction 113241680 Craftsman 10-inch flex drive table saw

A:

I did some research on your model number but did not find information on reversing the motor. Your expert will be able to help answer your question. It may take 24-48 hours. I do hope that everything works out on the table saw.

Read More
Marc -
December 21, 2012
A:

Thank you for your question on the table motor reversing direction.

For use on the table saw I would not advise reversing the motor. I am sorry but I do not have the information on how to reverse the motor direction.

The motor is more than likely, able to be reverse direction but you would have to look on the motor cord plate to see if they show that wiring option.

Some of the motors have a white motor wiring sticker on the body of the motor that may show which wires to switch to reverse the motor.

Sam A.

Read More
Sam A -
Sears Technician
December 24, 2012
See more answers
Q:

Converting CRAFTSMAN Model 113241680 10-inch Flex Drive Saw Table from 110V to 220V

A:

I don't understand what the reason could be for not allowing the motor to be converted to 230 volts.

I recommend you operate the saw on 115 volts to be safe. There must have been some reason the manufacturer didn't want the saw to operate on 230 volts. The saw has been operating a long time on 115, I wouldn't change it.

If you are familiar with U.L. there are some strange decisions passed down sometimes.

Read More
Jimmy K -
Sears Technician
June 16, 2009

Top Parts