Model #113236090 CRAFTSMAN Saw Scroll

  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

I need the bellows for the scroll saw model numbedr 113.236090, but it is listed as no longer available 2113.236090

A:

Thanks for the inquiry and for being a valued member.

I am sorry to hear that the bellow has been discontinued with no direct substitute offered. I know how frustrating that is. 

Unfortunately, there is not a manufacturer authorized substitution for the bellow. This is more than likely due to the age of the saw, being manufactured in the late '90s. Substitutions come from the manufacturer, and since there isn't one identified, that typically means the design has changed, and there isn't one compatible that will work. 

You can try running an online search for bellow part number 823791 to see if you can find an NOS (new old stock) available on sites like Ebay. That would be the only viable option we can recommend. We do not have an aftermarket part to recommend in place of the original. 

We apologize for the inconvenience and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
January 12, 2015
Q:

Blade 113236090 Craftsman 16" vs scroll saw

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

How to remove the Arm Bearings from my Craftsman 16" Scroll Saw Model# 113.236090

A:

I know this type of information can be very helpful for you to have. While you are waiting for an expert to respond, I have attached a helpful link below that may provide information to assist you with your question.

Read More
Yadira B -
January 15, 2013
A:

Thank you for your question. I will be happy to assist you. It looks like the only thing holding the two halves together is screws. Once all the screws are removed, you should be able to separate the two halves. The unit might have screws on each side. Then gently pry the haves with a flat blade screwdriver. Providing the unit is not rusted, it should come apart. If it is stuck, you can spray the part with quality penetrating oil and let it sit. After a few hours, try it again.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark.

Read More
Mark T -
Sears Technician
January 17, 2013
See more answers