Model #113234880 CRAFTSMAN Miter Saw

  • Repair, Figure 1
    3 Results
  • Repair, Figure 2
    3 Results
  • Repair, Figure 3
    3 Results
Find part by diagram >

Question and Answers

Q:

on/off switch

A:

I can understand your situation. I conducted a search that didn't pull up any results either. I will forward your question to an expert who will investigate the matter further and get back to you. You will hear from them within two business days if not sooner. Until you hear from us, have a nice day.

Read More
Henry -
June 10, 2013
A:

Hello Henry. I apologize for the problem that you are having with that part for your Craftsman Miter Saw Model 113.234880.

 

I checked for compatible switches on similar models. I did not find a switch that will work for your model of saw. In this situation, you will probably need to replace the saw unless you can find a used part available through an internet search. 

Read More
Lyle W -
Sears Technician
June 12, 2013
See more answers
Q:

Craftsman Slide Compound Miter Saw won't start

A:

I am sorry that you are having some difficulties with your saw and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
May 06, 2013
A:

I am sorry that you are having some difficulties with your saw and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
May 06, 2013
A:

Thank you for your question.  I am sorry you are having a problem with the saw. If the motor will not start, I recommend checking the outlet first. Plug in a known good tool and see it is works. If it does, the outlet is fine. If the motor still will not start when you push the button, you will need to do some internal electrical checks. If you have a meter, I recommend following the diagnostic instructions in the image below. Just click on the image to enlarge it. Once you determine the problem, you can order the replacement parts from the following link. Replacement parts for Craftsman miter saw model 113.234880.  I hope this is helpful. Please let me know if you need further assistance.   I hope this is helpful. Please let me know if you need further assistance. Mark.  

Read More
Mark T -
Sears Technician
May 09, 2013
See more answers
Q:

When you order a switch for a compound saw model 113234880, does it come with wires?

A:

The replacement switch for the miter saw does not come with the wires.

Look closely on the switch. There is a small hole near each wire with a release tab in it. You put a small screwdriver into the hole and press the tab down while you pull the wire out of the switch.

Read More
Jimmy K -
Sears Technician
April 01, 2010

Top Parts