Model #11322521 CRAFTSMAN Sander

  • Switch Box Assembly
    3 Results
  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

Where can I buy sanding belt 6x48 and disc 9" 11322521 Craftsman Craftsman belt and disc finishing machine

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina -
January 03, 2013
A:

Thank you for your question.



I will be happy to assist you. The part number for the belt and discs have changed. I looked up the disc for you. Please click here to see the discs. The belt can also be ordered from us. Click here to be taken to order the belt. These are just a few that we sell. You can get different grits belts and discs.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 07, 2013
See more answers
Q:

what is the belt size for the 113.22521 belt and disk finnishing machene

A:

Getting the correct belt is certainly important. Often the information is in the owner's manual. You can also get correct parts for your model at Sears Parts Direct. I attached both of the links below. I hope this helps while you wait for the expert.

Read More
Barbara H. -
September 25, 2011
A:

Thank you for the link for the Owners manual.Although It doesn't tell me the belt size.On the + side,Someone was nice enough to send me the size. 6X48 with a 9" disc

Read More
George -
September 25, 2011
A:

Thank you for our question on the belt and disc sander.

The drive belt is 1/2 X 41 inches. 4L410

The disc is 9 inches.

The sanding belt is a 6 X 48 inches.

Thank you for using Manage My Life.

Drive belt part number is: STD304410 4L410 BLT 1 5.49

Thank you for using Manage My Life.

Sam A.

Read More
Sam A -
Sears Technician
September 27, 2011
See more answers

Top Parts