Model #113221740 CRAFTSMAN Saw Table

  • Table
    3 Results
  • Blade
    3 Results
  • Miter Gauge
    3 Results
  • Fence
    3 Results
  • Brush
    3 Results
  • Guard And Bracket Assy.
    3 Results
Find part by diagram >

Question and Answers

Q:

table saw fence 113.221740

A:

Thank you for choosing sears I would be happy to help you with table saw. Upon researching model113.221740 ; at this time we do not know of a rip fence that would be compatible for this model other than the original part that has been discontinued.

I trust this information will help you, have a great day.

           

Read More
CarlosZ -
Sears Technician
February 03, 2015
Q:

Manufacture Date 113221740 Craftsman 10" bench top table saw

A:

Thank you for the inquiry and for using SearsPartsDirect.com. 

My internal records are showing a manufacturing date for this 10" bench top table saw in or around 10/16/1995. In regards to the retail price it was originally sold for, we don't keep those records and I wouldn't be able to give you an answer. 

Hopefully this helps and we appreciate you using SearsPartsDirect.com. Let me know if I can be of any further assistance. 

Read More
Jeff Wallace Sr -
Sears Technician
September 17, 2013
Q:

Saw blades

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Alina -
May 24, 2013
A:

 

Thank you for your question and I understand your concern. 

As Alina suggested in the first response, I will need to know the model number of the miter saw and table saw in order to provide an answer to your question. Without having the two model numbers, I can only provide general information.

If the blade size is the same in diameter and the arbor size is the same, then I would think the two blades should be interchangeable.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post along with the model number of the table saw and miter saw for confirmation.


 

Read More
Joey S -
Sears Technician
May 28, 2013
A:

several bits of info. these blades both fit both saws. They have pictures of miter saws on them and I think there were pictures of other saws but those have worn off with use of the blades. My miter saw is a Craftsman 113.235240, the table saw is a Craftsman 113.221740. I guess my question is whether this type of blade,tooth pattern etc is designed specifically for a miter saw or is it also designed for use in the table saw? Phil

Read More
Phil -
May 28, 2013
A:

Phil: If the blades will interchange, then you can do so. Depending on the material being cut, be sure to choose the correct blade for the material being cut. You can use any blade as long as it's the same diameter, safe for the RPM rating, and if it has the same size opening in the blade for installing.

Read More
Joey S -
Sears Technician
May 29, 2013
A:

thank you Joey. Phil

Read More
Phil -
May 29, 2013
See more answers

Top Parts