Model #113213150 CRAFTSMAN Drill Press

  • Figure 1
    3 Results
  • Figure 2
    3 Results
  • Figure 3
    3 Results
  • Figure 4
    3 Results
Find part by diagram >

Question and Answers

Q:

Spindle for Craftsman drill press

A:

I completely understand your need for a replacement spindle for your drill press. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
March 01, 2013
A:

I understand the frustration of not having a replacement part available.  The substitute model number provided does not bring up any information in my resources.  If you can recheck the part number for that model, it may help.  The manufacturer of your drill press no longer produces or recommends any substitute part.  You may be able to find a spindle to match by checking for this model being sold online, at a local machine shop, or at one of the many online forums for drill press machinery. It would be a shame to toss out an otherwise good drill press.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
March 03, 2013
See more answers
Q:

I have a customer with a Craftsman drill press model number 113.213150 who needs a support table with indicator and parts direct does not have it available.

A:

Having the support table with indicator is very helpful to have. I did do some research but was not able to locate one. Your expert will be able to help answer your question. It may take 24-48 hours. I do hope that all goes well.

Read More
Marc -
September 11, 2012
A:

Thank you for your request for some replacement parts on a drill press.

If you are looking for part number 817777-1 I am sorry but there is no other source for this part.

At the time this drill press was made it was an exclusive tool for Craftsman only and not made for any other brand.

The Special products power tool division of Emerson electric stopped providing tools to Craftsman in the late 90s and is not longer producing any tools.

The parts stock has been depleted with no other resource for the replacement parts.

I have found a part number of 817777-3 for a Rigid model drill press that they produced after no longer producing for Craftsman.

I will give you a link for that part on a different web-site. Take a look at the part on that page to see if it will work for you. In looking at the page you still may not be able to get it because of a backorder situation.

Drill press part .

I am sorry that I could not help you very much with your request.

Sam A.

Read More
Sam A -
Sears Technician
September 12, 2012
See more answers
Q:

Question about my Craftsman drill press

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner.

Read More
Alina F. -
December 17, 2011
A:

I would be afraid to order a chuck for a different drill. The chuck on your drill is a 5/8 inch chuck. I suggest you stay with the keyed chuck for the loads you can put on the chuck of a drill press.

Read More
Jimmy K -
Sears Technician
December 19, 2011
See more answers

Top Parts