Model #113201440 CRAFTSMAN Welder

  • Unit
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacement Switch 113201440 Craftsman Craftsman 30-200 amp home-n-shop welder

A:

 
Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when needing parts for the welder.
 
Glad to help out.   Im  looking at your Craftsman Welder  model number 113.201440.


I took a look by the model and by the part number.   I searched thoroughly everywhere including my research programs and had no luck.  No updated part number.   

When that happens can only advise you to use that part number in the search engines on line like google and bing.   Wish you the luck because not one of our factories has this switch in stock.

I hope this answers your questions but if you need further assistance please resubit another question with additional details.
 

Read More
Larry L -
Sears Technician
March 03, 2014
Q:

welder mod# 113.201440 is this welder AC or DC

A:

I know how important it is to have as much useful information about your welder as possible. I have done some research on your model on the Manage My Life website and have located the owners manual similar to your model. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
April 29, 2012
A:

Thank you for your question on the 30 to 200 amp AC only welder.

If it will not stay at one setting it sounds like the adjuster on the top of the welder that connects to the shunt on the inside of the cabinet is changing position and allowing the amperage setting to change.

The threaded knob and adjuster that attaches to the bracket for the shunt may be worn and is letting the shunt mover down. You may have to affect a local repair to the threaded adjuster parts to keep the shunt from moving.

This is a very old welder and replacement parts are no longer available.

Thank you.

Sam A.

Read More
Sam A -
Sears Technician
May 01, 2012
A:

I just need to know what the voltage and amps were on the original switch so I can match it.

Read More
Brian -
March 03, 2014
A:

I just need to know what the voltage and amps were on the original switch so I can match it.

Read More
Brian -
March 03, 2014
See more answers

Top Parts