Model #113198250 CRAFTSMAN Saw Radial

  • Unit
    3 Results
  • Base And Column Assembly
    3 Results
  • Yoke And Motor Assembly
    3 Results
  • Yoke Assembly
    3 Results
  • Arm Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Table Assembly
    3 Results
  • Leg Set
    3 Results
  • Motor 75128
    3 Results
  • Figure 10
    3 Results
  • Figure 11 - Guard
    3 Results
Find part by diagram >

Question and Answers

Q:

Wiring of locking switch on RAS 113.198250 113.198250

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 12, 2014
Q:

Ras binds when moving to 45 degrees right 113.198250

A:

Please disregard. I took the arm off and realized that the arm bearings can be installed upside down, which is what I did. The cut out in the bracket caught as I turned the arm. I reversed it and all is well. The same applies to the lower bracket. If it's upside down, the miter encoder won't slide into the reader. Once reversed, it slides in easily. With the arm off, it was easy to tighten the rip lock by tightening the eccentric nut a quarter turn.

Read More
Robert -
February 15, 2014
A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 09, 2014
See more answers
Q:

Model 113.198250 RAS Elevation encoder 113.198250

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there are problems with the Radial arm saw, Elevation encoder.
 
Glad to help out.   Im  looking at your Radial arm saw, Elevation encoder model number 113.198250.


I am sorry but there is no technical service manual to look at and clarify you problem.   However, there are 2 updated manuals they say are still available and have them on the links below if you are interested.

Owners manual for model 113.198250

manual for model 113.198250

I hope this answers your questions but if you need further assistance please resubit another question with additional details.
 

Read More
Larry L -
Sears Technician
February 26, 2014
A:

I asked two questions and received the same answer for both. If all I get for answers is a push to sell OM' s for $17 plus $7.50 shipping, then I am wasting your time. OBTW, the Owner's manuals are just xerox copies. I guess I'm on my own regarding reinstalling the elevation encoder, unless someone reading this cares to weigh in with some help.

Read More
Robert -
February 26, 2014
See more answers

Top Parts