Model #11319771 CRAFTSMAN Saw Radial

  • Unit
    3 Results
  • Yoke Assembly
    3 Results
  • Base Assembly
    3 Results
  • Arm Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Leg Set
    3 Results
  • Motor Assembly
    3 Results
  • Motor Assembly
    3 Results
  • Guard Kit 509346 / Table/handle
    3 Results
  • Guard
    3 Results
Find part by diagram >

Question and Answers

Q:

I had the same problem, but I used a $20 work-around. 11319771 Craftsman Craftsman 10 inch radical saw

A:

Thanks for the update and for being a valued member.

We always like to hear of innovative ways to fix an issue. I am sure this will help many on the site with the same issue. 

Thanks for the input and for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 22, 2015
Q:

10" radial arm saw reset button

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide a little more information such as the make and complete model number of your product so your expert will be able to provide you the best possible answer. Just click on reply below where you can provide the additional information.

Read More
Alina -
May 31, 2013
A:

it is an older ( 1980 ish ) 10" craftsman radial arm saw model # 113.19771, i was cutting a 4x4 and bound up the blade, i quickly shut it off but could not restart it - pushed the reset button but could not get the motor to start, checked and i do have power at the plug, can i by-pass the reset button - what wires do i connect together? i have never had ANY trouble with this saw or reset button, this is the first spot of trouble!

Read More
robert -
May 31, 2013
A:

Thank you for your question. I am sorry you are having a problem with the motor on your Craftsman radial arm saw model 113.19771. If the motor stopped working when you were using it I suspect the problem is the thermal protector. If it will not reset it has to be replaced. To prove the protector is defective you can bypass it. Most protectors have two wires. To bypass these you just disconnect the protector and tape the two wires together. Then check the operation. If the unit works, the protector needs to be replaced. Do not leave the protector bypassed. Doing so could result in the unit overheating and catching on fire. I looked up the protector and found it is no longer available. You may be able to find a protector from a local motor repair shop. Sometimes they keep them laying around.   I hope this is helpful. Please let me know if you need further assistance.    Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
June 04, 2013
A:

Information about the motor protector used in Sears ras 113.19771. The Sears parts diagrams indicate there were two motors used for this saw model. The first, and presumably older, motor used a Klixon model D157 phenolic protector (Sears number 64625). The second used a slightly different Klixon model CGJ65EB phenolic protector (Sears number 64734). Klixon changed it's phenolic motor protector model numbering scheme sometime in the late 50's early 60's. The older Klixon model D157's "modern" part number is CEG65GB. There are two differences between these protectors. The CGJ comes with higher current rated contacts and has a dust cover over the top of unit when compared with the CEG. While both protectors should work (and fit) fine with either motor, the newer CGJ part is the more robust choice. Both protectors are still in production. You may obtain them at any number of industrial motor rebuild/repair shops. Here is one I found with reasonable prices and shipping: http://www.carbonbrush.com/klixonCEandCG.htm

Read More
N -
June 10, 2015
See more answers
Q:

Changing Motor Connections 113197751 Craftsman Craftsman 10 inch radical saw

A:

Thanks for the inquiry and for being a valued member.

The motor will be inside of a housing. On the top housing (key #13), there should be a nameplate (key # 16) secured with a screw. That will be the access to the terminal board. I have linked the Sears Parts schematic showing the key numbers I've referenced above. 

Motor Assembly Schematic for Model 113.197751

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
March 02, 2015

Top Parts