Model #113197110 CRAFTSMAN Saw Radial

  • Figure 1
    3 Results
  • Figure 2 - Base And Column Assembly
    3 Results
  • Figure 3 - Yoke And Motor Assembly
    3 Results
  • Figure 4 - Yoke Assembly
    3 Results
  • Figure 5 - Arm Assembly
    3 Results
  • Figure 6 - Guard Assembly
    3 Results
  • Figure 7 - Table Assembly
    3 Results
  • Figure 8 - Leg Set
    3 Results
  • Motor 818888
    3 Results
  • Figure 10
    3 Results
  • Figure 11 - Guard
    3 Results
  • Guard Kit 509398/99 Table/ Handle
    3 Results
  • Guard
    3 Results
Find part by diagram >

Question and Answers

Q:

Replacement blade 113197110 Craftsman Radial saw

A:

Thanks for the inquiry and for being a valued member.

You can likely pick up a replacement blade from a local Sears retail store. The part number for the blade was 9-32668, but we do not stock it any longer. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 30, 2015
Q:

Leg set 113197110 Craftsman Radial saw

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, there has not been a substitute recommended by the manufacturer for the replacement legs on this model. That would mean that there is not a leg currently available that would be suitable. 

In an event like this, you can either run an internet search for the part number to see if there are any still in circulation, or you can fabricate a replacement leg. Those would be the two most viable options at this point.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
November 25, 2014
Q:

Craftsman 10" radial arm saw when switch to ON position motor hums but blade will not turn.

A:

Having an appliance that is not working properly can be inconvenient and I will be happy to help. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
June 09, 2011
A:

Joseph, I appreciate your help... the motor hums, the blade barely jumps but does not rotate. Turning off the switch I can turn the blade either direction, no noise.. btw, bought the new capacitor from Sears parts for the saw. Yes, it has been around awhile but taken care of.. Used often in the shop.

Read More
Ike -
June 09, 2011
A:

Is it possible to check to see if the brushes are clean and or worn and or need to be replaced?? Many thanks, Ike

Read More
Ike -
June 10, 2011
A:

Does anyone have the Part number & the approx amount of $, & where I can purchase a motor for 113.197110 Craftsman radial arm saw??? Many thanks, ike

Read More
Ike -
June 10, 2011
A:

The part number for the drive motor on that table saw is 818888. You can order that part from the Sears PartsDirect website. It costs $159.99 not including tax, shipping and handling.

Based on your description, replacing that motor should fix your problem.

Read More
Lyle W -
Sears Technician
June 11, 2011
A:

Lyle I appreciate you taking the time to give me the info... Many thanks, ike

Read More
Ike -
June 11, 2011
A:

I am having the same problem with my saw, could it be the relay switch?

Read More
sam -
November 01, 2014
See more answers

Top Parts