Model #113196421 CRAFTSMAN Saw Radial

  • Main Assembly
    3 Results
  • Yoke Assembly
    3 Results
  • Base Assembly
    3 Results
  • Guard Assembly
    3 Results
  • Arm Assembly
    3 Results
  • Leg Set
    3 Results
  • Motor
    3 Results
Find part by diagram >

Question and Answers

Q:

Power/rewiring Motor 113196421 Craftsman 10" radial saw

A:

Thank you for contacting SearsPartsDirect.com with your concerns about your Craftsman Radial Saw. I am so sorry to hear that the motor was smoking and that the saw is still blowing the house fuses. I can understand your concerns about the wiring and wanting to get this issue corrected. I will be happy to help you with this. I have included the link for you to view the Owner's Manual online in case you don't have a copy. 

 

Owner’s Manual for Craftsman Radial Saw Model 113196421.

 

The manual states that this saw is wired for 120V. I found this information in the manual under Electrical Connections on page 42. I also noticed that your saw is one of the models that have a dual voltage motor, but it is advisable to have a qualified electrician reconnect it for 240V. (I found that information on page 44.)

 

If you are not comfortable completing this repair yourself, you can have a Sears' technician complete the repair for you. To set up service please go to www.SearsHomeServices.com or call 1-800-469-4663. I hope this answers your questions. If I can be of further assistance please respond to this thread. Thank you for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
August 27, 2013
Q:

Bought used Craftsman 10" radial arm saw, model 113.196421. Making adjustments, unlock the arm lock I cannot move arm. Am I missing anything to move the arm?

A:

I am sorry that you are having some difficulties with your radial saw and I will be happy to help. I did some research and I was able to find a link with a similar question. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
January 26, 2013
A:

Thank you for your question. I will be happy to assist you. The arm support has an indexing block that the latch locks into in some positions. To get the arm to swing left or right, you have to pull the release handle all the way forward. This will disengage the latch and allow you to swing the arm. If this does not release the latch, I recommend inspecting the latch and clamp at the support. I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
January 29, 2013
A:

Mark, thank you for this information. I can now swing the arm and set to the angle I need. Thanks again!

Read More
stevhord -
January 29, 2013
See more answers
Q:

Craftsman radial arm saw, 113.196421 has non-working locking switch - part #63896.

A:

I'm sorry to hear that you are having some difficulties with your Insert saw. I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Carmen G -
January 28, 2013
A:

You are looking for a round-headed, yellow-plastic child safety key that fits into your model number Radial Arm saw. It is part number 22255, sold on the Sears Parts Direct.com site, for $5.99 - plus shipping. You may want to check local Sears Service Centers for local availability of the yellow plastic part.

Read More
Adam -
January 29, 2013
A:

Thank you for your question. I am sorry you are having a problem with the saw. In the details of your question, it is not clear if you are missing the yellow safety key in the switch. I posted an image of the key below. The switch needs to have this key to turn on. If you are missing the key you can order one by clicking here If the key is in position and the switch will not turn the saw on there is a problem with the switch. I looked up the switch and found it is no longer available. If you are handy, you should be able to wire in a universal switch from the hardware store.

I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
January 29, 2013
A:

Here is the image of the key.

Read More
Mark T -
Sears Technician
January 29, 2013
See more answers

Top Parts