Model #113177110 CRAFTSMAN Wet/Dry Vacuum

  • 2 Gallon Wet/dry Vac
    3 Results
  • 113 Accessory A
    3 Results
Find part by diagram >

Question and Answers

Q:

I have a 2 gallon Sears wet dry vac and want to know how to remove the cage assembly.

A:

Thank you for your question.

 

I will be happy to assist you. I looked up the model number you submitted. According to the parts list the cage is secured to the motor assembly with tabs. The tabs on the cage fit into notches in the motor housing. To remove the cage, look around the cage and motor for the tabs. Then insert a flat blades screwdriver between the motor housing and cage. Then gently pry to release the tab from the motor housing. Once you have that tab released hold pressure on the cage so the tab does not drop back into the notch. Then move the screwdriver to the next tab and release it the same way. Usually once two of the tabs released the cage will come off. When you want to reinstall the cage, just align the tabs and push down.

 

I hope this is helpful. Please let me know if you need further assistance.

 

Thank you for using Manage my life.

Mark

Read More
Mark T -
Sears Technician
November 21, 2013

Top Parts