Model #113 SCHWINN Cycle

  • Cycle
    3 Results
Find part by diagram >

Question and Answers

Q:

parts book for radial arm saw model 113.29410 also is service available on this saw.

A:

Definitely having to do repairs yourself can be a challenge to help in determining if you have the right part I would suggest visiting Sears parts direct.com where you can view a diagram of all parts still available for your Saw. You also have an option is visit Sears Home Services and use the scheduler. While you wait for the expert to review your model, you can check the bottom links. Hope this is of help.

Read More
Priscilla V -
September 20, 2011
A:

Thank you for your request and question on the radial arm saw.

I have e-mailed you manual for the saw.

I do not know if they will still do service on this saw because of its 1967 vintage there is virtually very few parts available if they are needed.

If you need to do some adjusting on the saw the manual will help you.

Parts illutration for saw .

Please let me know what you need to do to the saw and I will be glad to help you.

Sam A.

Read More
Sam A -
Sears Technician
September 21, 2011
A:

I have model 113.29410 radial arm saw. The arm swings freely with no stops when the knob is turned counterclockwise (loose) Lever seems to be locked in the open position. I have tried pushing the lever forward but no luck. I don't want to break it. help

Read More
Steve -
January 30, 2016
See more answers
Q:

Dishwasher won't wash 665.13032K113

A:

Thank you for your inquiry on your Kenmore Dishwasher, Model: 665.13032K113. From reviewing the details on your model,from the description of the problem I suspect the diverter motor is the problem. The control powers the diverter but I would suspect the diverter motor over the control. The diverter valve should have two light blue wires attached and is powered by 120 volts from the control. I would first suggest you use a meter to check resistance across the diverter motor. An open circuit would indicate the diverter is bad. Remember to turn the power off first.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dishwasher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 19, 2015
A:

I have a similar situation....Top rack dishware will not wash, not sure if the washer arms are circulating. Dishwasher soap dispenser always has dish soap in it, never fully cleared out. Any thoughts?

Read More
Matt -
January 24, 2016
A:

I have a similar situation....Top rack dishware will not wash, not sure if the washer arms are circulating. Dishwasher soap dispenser always has dish soap in it, never fully cleared out. Any thoughts?

Read More
Matt -
January 24, 2016
See more answers
Q:

craftsman

A:

I know how important it is to have detailed information about your Jointer and I will be happy to help. I did some research and I was able to find the owners manual for your Jointer. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
December 27, 2012
A:

Thank you for your question on the age of this jointer/planer model 113.206932.

It was built on the 119th day of 1988 and was 332 on built on that day in Paris Tennessee.

I hope this will help you.

Sam A.

Read More
Sam A -
Sears Technician
December 28, 2012
A:

I have both craftsman jointers /planer models # 113.232200 and # 113.206932 and would like to know which would be the newer model? and in your opinion which one gives the least problems? only major difference I see is the mounting of the motor. One is mounted to stand and the other is mounted under outfeed table.

Read More
jim -
January 20, 2016
See more answers

Top Parts