Model #113206931 CRAFTSMAN Jointer/Planer

  • Bed Assembly
    3 Results
  • Infeed Table
    3 Results
  • Fence Assembly
    3 Results
  • On/off Power Outlet
    3 Results
  • Leg Set
    3 Results
  • Motor Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Can I get the knife setting guage Cat. # 9-2647 for model # 113.206931 6 1/8 jointer-planer?? 113206801 Craftsman 6 1/8-inch jointer-planer

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, the knife setting gauge has since been discontinued with no direct substitute applicable to your model of 113.206801. Without a substitution by the manufacturer, we cannot guarantee any other gauge would work properly with the unit. 

The best recommendation we have is to run an online internet search for the gauge part number of 9-2647. It's not too uncommon to find accessories such as this listed on Ebay and sites like that. 

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
January 26, 2015
Q:

Adjust infeed blade heigth Model #113206931

A:

Thank You for choosing Sears PartsDirect.com. It is unfortunate to hear that you are having issues with your planer and I do understand your frustration. Glad to help out. I'm looking at your model number 113206931 and here is video that will help you with your issue. I tried searching for the knob or any other items that may have had  the scale that indicates where the depth is but was not able to locate any pictures to verify this. I hope this information helps you. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
July 24, 2014
Q:

I need an replacement motor, can I order this? 113206931 Craftsman 6 1/8-inch jointer-planer

A:

Thank you for your question.

 

I am sorry you are having a problem with the jointer-planer. I looked up the model number you submitted. We no longer offer a replacement motor for the unit. This model uses a universal power tool motor. I posted an image below that contains the motor specifications. Click on the image to enlarge it. If you do not see the image, you can click on the following link.

 I need an replacement motor, can I order this? 113206931 Craftsman 6 1/8-inch jointer-planer

I searched on line for a replacement motor. I found one site that offers this type of motor. Click here to be taken to that site. 

 

 I hope this is helpful.

Please let me know if you need further assistance.

 

Thank you for using Manage my life.

 

 Mark

Read More
Mark T -
Sears Technician
October 11, 2013

Top Parts