Model #1122 HOOVER Vacuum, Upright

  • Agitator, Cleaningtools
    3 Results
  • Handle
    3 Results
  • Motor Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Does this front cover come in stainless steel? LDS4821BB Lg Dishwasher

A:

Thank you for your inquiry on your Lg Dishwasher, Model: WM1122HW. From reviewing the details on your model, it appears that there was a stainless cover for this model, but as far as I’m seeing it appears to be no longer available by the manufacture with no substitution. The only recommendation is trying to find the part on an aftermarket site or a aftermarket store. The part number to the stainless cover was AGL36868103.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 29, 2015
Q:

Washer is very load and has a burning smell WM2233HW Lg Washer

A:

i meant very loud noice

Read More
Stormy -
April 24, 2015
A:

Thank you for your inquiry on your Lg Washer, Model: WM1122HW. From reviewing the details on your model, as far as the lound grinding noise, you could be experiencing an issue with a belt, motor, drive motor coupling, or bearing.I have provided a link to a couple of videos on similar model of washers, which should be able to troubleshoot what could be causing the washer to produce the burning smell.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 29, 2015
See more answers
Q:

clock goes out on gas stove when burners are turned on

A:

Thank you for your question. I'm sorry you are having this problem with your new range. Since the clock does work when the control is reset but then quits again, it would lead to a control problem. However, this could also be caused if there is no ground to the range. First, check to see if the outlet to the range has a good ground. If it's not grounded properly, an electrician may be needed. If there is a good ground, then a technician will need to check this under warranty. I'm listing a site you can access, to schedule a tech to come out. Here is a link for the website: Sears Home Services. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
November 25, 2013

Top Parts