Model #110C87572601 SEARS / CANADA Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • Door Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore dryer model 417.81122310 110C87572601 Sears / Canada Dryer

A:

Thank you for your inquiry on your Kenmore Dryer, Model: 417.81122310. From reviewing the details on your model, I have provided an insert from the service manual which explains how to perform the diagnostic test for your dryer.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
July 07, 2015
A:

I am unable to read the section from the Manual. Can it be emailed to me?

Read More
Sean -
July 07, 2015
See more answers
Q:

Blinking lights on Kenmore He2 dryer

A:

Flashing of the lights on this Kenmore dryer is a way of telling you whats going on. The link provided below may be of some help while waiting for an expert response on your specific model. Response time is two business days.

Read More
Anna T -
September 17, 2012
A:

I recommend that you try to reset the control board in that dryer by unplugging it for 5 minutes. Plug it back in and see if the control will work normally.

According to your model number, that appears to be a Canadian model. I did find technical information for that dryer even though it appears to be Canadian. You could have a problem with the main machine control board or the user interface control board. The machine could also be indicating that it detected a component problem even though it does not signal an error code in the normal mode of operation. I posted information about the service diagnostic test on that model in first image below. You can use that mode to check for a current error code. That mode can also be used to check the user interface control board and other components. I provided some access information in the second image. Be sure that you unplug the dryer before accessing internal components.

This initial testing information may help you determine the cause of that dryer problem. You can order parts from this page (if you are in the United States): Kenmore HE2 Dryer Model 110.C87572601 Parts . In Canada, you can order parts by calling Sears at 1-800-469-4663.

If you need more help, reply with additional details and we will assist you further.

If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services (in the United States). For service in Canada, you can call 1-800-469-4663.

Read More
Lyle W -
Sears Technician
September 19, 2012
See more answers

Top Parts