Model #11097721702 KENMORE ELITE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8576353 Burner Assembly
    3 Results
  • Door Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

Looking for specs and dimensions on the following Kenmore appliances: 11045081400(washer) 11097721702(dryer) 79577542600(refrigerator)

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
November 23, 2011
A:

Refrigerator

  • Depth, less door: 27- 7/8 in.
  • Depth, Total with Door Open: 46- 1/2 in.
  • Maximum Depth w/ Handle: 34- 1/4 in.
  • Height w/o Hinge: 68- 3/8 in.
  • maximum height w/Hinge: 69- 3/4 in.
  • Maximum Width: 35- 3/4 in.
  • Depth, Less Door Handle: 31- 3/4 in.
  • Total Capacity: 25 cu.ft.
  • Refrigerator Section: 17.5 cu. ft.
  • Freezer Capacity: 7.5 cu. ft.

Washer

  • Capacity: 3.8
  • Height: 38 in.
  • Depth: 31- 1/2 in.
  • Width: 27 in.

Dryer

  • Capacity: 7.4 cu. ft.
  • Height: 38 in.
  • Depth: 32- 9/16 in.
  • Width: 27 in.

Read More
Korinna S -
Sears Technician
November 23, 2011
See more answers
Q:

kenmore gas dryer ch

A:

A model number would help me give you a more specific answer to this problem but when the igniter is not glowing the most likely problem is with the thermal fuse.

A bad thermal fuse will allow a gas dryer to run the motor but it will not allow it to heat.

If you haven't I would suggest you check the thermal fuse which is located on the blower housing.

If you submit a question with a model number I can give you more specific information on how to access and check the thermal fuse on your particular dryer.

Read More
Fred M -
Sears Technician
May 14, 2010
A:

I have a Kenmore Elite HE5 Steam GAS DRYER. Mod 110.97721702, SER MY 4702 447, TYPE DADT-NAT-1206006-EL20. THE door doesn't close well, The upper part is separated about 1/2 inch when the boottom part is well closed. To make the dryer work I have to push and hold the upper part. This dryer is in Lima, PERU. This problem happen in the first time on. Please advised me what to do.

Read More
Angel -
May 17, 2010
See more answers

Top Parts