Model #11097591240 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How old is this dryer? 11097591240 Kenmore Gas dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11097591240; based on the model number provided this mode is showing to be from 1995.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
February 26, 2015
Q:

Dryer won't stay running 11097591240 Kenmore Gas dryer

A:

Thank You for contacting SearsPartsDirect.com. I do apologize for the delay in answering your question.

If the dryer will not keep running when the start switch is released then the motor switch is bad or there is a bad connection on the black wire at the motor switch.

If you need further assitance please let me know. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
March 30, 2014
A:

When you say motor switch, are you referring to the push starter button located in the dash panel? Or are you referring to the centrifugal switch inside the motor?

Read More
Ricky -
March 30, 2014
A:

I do apologize for the confusion. On this model it is called the Push-To-Start Relay. Part number 3398094

Read More
Desirea -
Sears Technician
March 31, 2014
See more answers
Q:

gas dryer model # 11097591240 glows for 9 seconds then goes off how to troubleshoot thermal fuse is ok vents are clean

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I'm sorry to hear that you are having some difficulties with your Kenmore Gas Dryer. I did some research for you at Managemylife and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices. I hope these links provided assist you.

Read More
James -
January 25, 2012
A:

Thank you for your question and I understand your concern.

Based on your symptom it sounds like the solenoid coils mounted on top of the gas valve assembly are faulty. When the coils become weak, the coils can not open the gas valve. Replace the solenoids and your dryer will most likely ignite again. The coil kit is part #279834 which can be ordered from Sears PartsDirect .

I added a YouTube videl showing how to replace the solenoids .

This is most likely the issue. If not, please reply and I will be glad to assist you further.

Read More
Joey S -
Sears Technician
January 26, 2012
See more answers

Top Parts