Model #11097583820 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • 3387617 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer sensor installation

A:

Managemylife.com is always a great resource to find the answers to just about anything. Your expert will research your question and respond within two business days but usually sooner. Have a great day!

Read More
Alina -
August 17, 2012
A:

I can't get the back of my dryer off, as it seems to be welded on... What do I do?

Read More
Kevin -
August 17, 2012
A:

The images below may help you complete this project. The first image shows the moisture sensors and the 2nd image shows further access the unit if needed.

Read More
Fred M -
Sears Technician
August 19, 2012
A:

Thanks for this information, but I still don't know the location of the "sensor" that I need to replace... Can you tell where this is located and how to access/replace it?

Read More
Kevin -
August 19, 2012
A:

In the image above the moisture sensor is located just below the lint filter screen. The picture shows the front of the lint filter housing. The moisture sensor consist of two metal bars. As wet clothes tumble across the bars the wet clothes complete a circuit. One thing to try is to wipe the two metal bars down with rubbing alcohol. Fabric softener can build up on the metal bars and prevent them from "seeing" the wet clothes. The first image above shows how to remove the front panel if needed. There should be wires attached to the sensors. Remember to unplug the dryer first.

Read More
Fred M -
Sears Technician
August 20, 2012
See more answers

Top Parts