Model #11096585200 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

no heat 11096585200 Kenmore Electric dryer

A:

Thank You for contacting SearsPartsDirect.com. I do apologize for the delay in answering your question.
I know it can be irritating when the dryer stops working. The information you have already received is correct. I recommend first checking for a tripped breaker, especially if there have been problems, with the power supply. There is a thermal fuse inside this dryer but if it blows, the dryer won't run at all. If the breakers are ok, then the voltage will need to be checked at the dryer terminal block, located behind the unit. Making voltage checks can be dangerous and unless you are very confident in your repair skills and have a meter, a technician will be needed. I'm listing a site you can access, to have a tech come out. Here is a link for the website:

Sears Home Services

 If you need further assistance, please resubmit your question with additional details. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
March 21, 2014
Q:

Need wiring diagram for Kenmore dryer

A:

I know how useful the wiring diagram can be when doing some major repairs. I suggest you add to the thread of this question and include the full model number of your dryer so that the expert can provide you with a more detailed answer. The expert has access to most wiring diagrams and he or she will be happy to respond within 24 to 48 hours. Thank you for your patience.

Read More
Joseph P. -
September 29, 2012
A:

OK, I'm not sure what all I need so I'll post what else I have. serial number ME3519993 What else am I missing?

Read More
Shana -
September 30, 2012
A:

Thanks for your inquiry about the dryer model 110.96585200, I will be glad to help with this.
I have attached wiring diagram for your model, top section is electric dryer, and the bottom section is gas. I hope this helps, should you need additional help replay with details.

Thanks Ron H.

Read More
Ron H -
Sears Technician
October 01, 2012
See more answers
Q:

Why isn't dryer taking so long to dry?

A:

When the dryer is taking too long to dry it is usually an easy fix. I am providing a few link with similar issues on dryer which may be helpful while waiting for an expert response.

Read More
Anna T -
June 19, 2012
A:

Thank you for submitting your question. Thank you for submitting your question. Long dry times is usually an indication of a clogged or restricted exhaust vent. Before replacing any parts, here are some tips that may help:

  • Check the flexible vent hose behind the dryer for kinks or clogs.
  • Check the exhaust duct to the outside of the house for lint build-up or restrictions.
To verify if it's the dryer vent, try drying a medium load of towels on high heat with the flexible exhaust duct behind the dryer disconnected and the unit venting directly into the room. If the load dries significantly more with the exhaust vent duct system disconnected, then the restricted exhaust air flow is causing your issue. While the vent is disconnected during the above test, also check the temperature of the exhaust air coming out of the dryer with a thermometer. On most Kenmore and Whirlpool dryers, it should be cycling around 150 degrees F. If it is not cycling properly, you could have a thermostat problem not the heating element. I hope this information helps. Please reply back to this thread if you require further assistance. Thank you for choosing Manage My Life.

Read More
Tykara -
Sears Technician
June 22, 2012
See more answers

Top Parts