Model #11096574100 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Dryer Model # 11096574100 wont start

A:

It does leave you feeling a bit confused when a dryer goes through one cycle and then just stops. I was able to locate a similar question that may help answer the "what happened" while you wait for the expert to review your model. I atatched the link below. I hope this helps.

Read More
Barbara H. -
April 15, 2012
A:

When an electric dryer suddenly won't run then usual suspect is the thermal fuse located behind the rear panel. The thermal fuse can be checked for continuity if a meter is available. The image below will show how to remove the rear panel to access the fuse. The fuse can be obtained from the following link: Kenmore Dryer Thermal Fuse . Remember to unplug the dryer first. ]

Read More
Fred M -
Sears Technician
April 16, 2012
See more answers
Q:

What is the cubic foot capacity of my Kenmore washer and dryer?

A:

Something that I would recommend you do is go onto the Sears.com website and look for your model. Usually it will have the dimensions provided for you to view. I attached the link below. I hope this helps.

Read More
Alina F. -
February 24, 2011
A:

Your washer is 3.7 cu. ft. and the dryer is 7.0 cu. ft.

Read More
Korinna S -
Sears Technician
February 25, 2011
See more answers

Top Parts