Model #11096274800 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

loose wire

A:

I'm sorry that you are having difficulties with the timer of your dryer. I did some research for you at Managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond to your specific question. I have attached the link below. I hope you find this information useful.

Read More
James -
April 22, 2011
A:

Thank you for your question and I understand your concern.

I must assume the timer will advance when set to TIME dry but not advance when set on the AUTOMATIC settings.

The wire will likely connect to the high limit thermostat on the side of the circuit between the heating element terminal and the high limit. See image below. The wire would connect the resistor to the high limit/H1 terminal on the heater. I hope this helps.

Read More
Joey S -
Sears Technician
April 23, 2011
See more answers

Top Parts