Model #11094821301 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
  • 8318276 Burner Assembly
    3 Results
  • Door Parts
    3 Results
  • Pedestal Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

gas dryer 11094821301

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dryer.

From the information you have provided above, I can understand the frustration of having your dryer malfunction, after researching model number 110.94821301. The first thing I recommend you do is check the temperature of the exhaust air and make sure that it is not a heating problem. This can be done by removing the vent hose from the back and running a medium load of clothes to dry. The vent can be blocked causing the dryer to take longer to dry.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
June 03, 2015
Q:

Kenmore Elite HE3 11094821301 Kenmore Residential dryer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dryer.

From the information you have provided above, I would recommend going first with the thermistor. If that still leaves you in the same situation. It possibly could be something with the control board.it may not be sending the correct signals to heat the dryer. The thermistor will most likely fix the issue. If it gets to this point I would suggest calling for service to be on the safe side. You can set up service at 1-800-4MY-HOME.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 28, 2015
Q:

Kenmore Elite Dryer HE3 (gas)

A:

I seen someone had a similar problems with your Kenmore Elite Dryer HE3 (Gas). While you are waiting on an expert to answer your question. I found this great on why your Dryer won't start,beeps, and blinks. I attached the link below. Hope this helps!

Read More
Dezeray S -
August 18, 2010
A:

There are two things I'd suggest checking. The first is the "Auto Dry Level" button. This button turns the "Control Lock" feature on or off. Press and hold it for several seconds and see if the control lock will turn off or on.

If there is no change or you can't turn the control lock feature on/off then most likely there is a stuck or shorted keypad. From the description you give I suspect a stuck button.

Make sure the door is shut is the second thing to check. You don't mention any problems with the door or if you leaned on it.

I hope this helps. If not then you may need to submit another question with any additional details and we'll go further with this problem but from the description you give the unit is likely in control lock.

Read More
Fred M -
Sears Technician
August 19, 2010
See more answers

Top Parts