Model #11092972100 KENMORE Laundry Centers/Combos

  • Washer/dryer Control Panel
    3 Results
  • Dryer Cabinet And Motor
    3 Results
  • Dryer Bulkhead
    3 Results
  • Dryer Support And Washer Harness
    3 Results
  • Washer Top And Lid
    3 Results
  • Washer Cabinet
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Washer Water System
    3 Results
  • Miscellaneous
    3 Results
  • Dryer Front Panel And Door
    3 Results
  • 3402855 Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Grill out cover for Kenmore washer/dryer combo110.92972100

A:

Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I'm sorry about the difficulties your having with your replacement part not fitting properly .Your expert can verify and help you reorder it if necessary. I did some research for you at Managemylife.com and found an excellent article on maintaining your laundry products you may enjoy. The link is attached below.

Read More
James -
July 09, 2011
A:

Uploaded picture of replacement part I received to show the difference between the diameter of the plastic extension next to the mounting hole for the screw

Read More
Jorge -
July 10, 2011
A:

Hi Jorge,

Thank you for submitting a question to Manage My Life.

I am sorry you are having problems with your dryer.

According to the parts websites I have checked, that is the correct part you ordered. There are no issues that I am aware of with these parts. You may have to alter the size of that nipple somewhat or you could try reordering the part.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Thanks again for using Manage My Life.

Landell

Read More
Landell -
Sears Technician
July 11, 2011
See more answers
Q:

my kenmore washer is not spinind and draine the water.

A:

If the washer will fill and agitate but will not drain and spin then the most likely cause of the problem is a bad lid switch.

The washer can fill and agitate with a bad lid switch but it can't drain or spin.

The 3355458 lid switch can be obtained from the following link: Sears PartsDirect .

With the transition panel removed you can access the screws holding the top. The top will slide forward to release.

Remember to unplug the unit first.

I hope this information helps to resolve this problem but submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
May 03, 2010
Q:

Why did my Kenmore dryer melt a pillow case?

A:

On something like this I recommend checking the operating temperature of the dryer. If the dryer is overheating you will need to check the thermostat & the air flow out of the exhaust vent. Are you sure that the pillowcase is dryer safe? Some fabrics like silk are not made to be put in a clothes dryer.

Read More
biker dave -
Sears Technician
June 25, 2009

Top Parts