Model #11092966102 KENMORE ELITE Laundry Centers/Combos

  • Washer/dryer Control Panel
    3 Results
  • Dryer Cabinet And Motor
    3 Results
  • Dryer Bulkhead
    3 Results
  • Dryer Support And Washer Harness
    3 Results
  • Washer Top And Lid
    3 Results
  • Washer Cabinet
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Washer Water System
    3 Results
  • Dryer Front Panel And Door
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Question and Answers

Q:

error code 11092966102 Kenmore Elite Washer/dryer laundry system

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.9296102. The F35 indicates a water level pressure sensor failure. I would suggest replacing this to have the code cleared. The part number for the pressure switch is 8521945.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
June 22, 2015
Q:

How can I enable my dryer buzzer?

A:

You dryer appears to have an End of Cycle signal switch which is part of the Push to Start switch. (See image below) If the dryer push to start switch is not set to signal ON the end of cycle will not come on. If you do have it set to ON and it still does not signal the end of cycle there could one of several possible failures.

  1. Disconnected end of cycle signal buzzer
  2. Failed buzzer
  3. Loose wire connection
  4. Timer contact failure
  5. Motor centrifugal switch

I recommend calling a service technician to diagnose and repair your dryer.

Read More
Joey S -
Sears Technician
March 16, 2009

Top Parts