Model #11092964102 KENMORE ELITE Laundry Centers/Combos

  • Washer/dryer Control Panel
    3 Results
  • Dryer Cabinet And Motor
    3 Results
  • Dryer Bulkhead
    3 Results
  • Dryer Support And Washer Harness
    3 Results
  • Washer Top And Lid
    3 Results
  • Washer Cabinet
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Washer Water System
    3 Results
  • Dryer Front Panel And Door
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Question and Answers

Q:

I'm looking for a manual to show me how to install a lid switch on a Kenmore Elite Washer /Dryer System. Model number 110.92964102

A:

I'm sorry that you are having some difficulties with your Kemore Washer/ Dryer System. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. Remember that your expert can walk you through a repair like this and even verify any required parts you may need to order. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links will help until your expert can respond.

Read More
James -
August 24, 2011
A:

Thank you for your question and I understand your concern.

I added an image below with the instructions on how to access the lid switch. NOTE: Disconnect the power cord from the power source before servicing your washer.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 25, 2011
A:

I cannot find an image with instructions to access the lid switch.

Read More
EDWARD -
August 15, 2013
A:

Edward: The image is the Manage My Life web site. Copy and paste the URL address below in your browser and it will take you to the link and image. http://www.managemylife.com/mmh/questions/264657-looking-manual-show-install-lid-switch-kenmore-elite-washer-dryer-system-model-number-11092964102

Read More
Joey S -
Sears Technician
August 15, 2013
See more answers
Q:

Spring loaded hinge?

A:

I can see how it would concern you when your washer door is falling with no resistance. I researched your question and found a link from the Sears Parts Direct website that includes that spring needed to add resistance to your washer door. I attached the link below. I hope this helps.

Read More
Jackie S -
March 15, 2012
A:

Thank you. that may be it, but I cannot see an image of it. I could probably find it in the diagram for a model that is comes in. In other words, is there a model number that has this part so I can see the diagram that has this part? Thanks!

Read More
Stephen -
March 15, 2012
A:

It does not appear that changing those hinges will cause the lid on your Whirlpool washer to close any slower. Those lids are different. Neither model has any spring resistance in the hinge. I do not see any compatible hinges that have springs attached to those components for resistance. The hinges on that Kenmore Elite model may not fit the Whirlpool model. If you want to try replacing those original hinges with the Kenmore hinges then it should not hurt anything. If it does not work, you can switch the hinges back.

If need to order those lid hinges for the model 110.92964102, here are the links for those parts: Right Washer Lid Hinge for Kenmore Laundry Center 110.92964102 , Left Washer Lid Hinge for Kenmore Laundry Center 110.92964102 .

Read More
Lyle W -
Sears Technician
March 16, 2012
See more answers

Top Parts