Model #11092832100 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Door
    3 Results
  • Pedestal
    3 Results
  • Burner Assembly
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore gas dryer 402 99032010 40299032010 Kenmore Dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the dryer.
 
Glad to help out.   Im  looking at your Kenmore Gas Dryer model number 40299032010.

First thing for safety and concerns to keep dryer running well is to check the lint screen and vent of air flow going out of the house.   If clogged up it could cause heating problems on any dryer.
 
To prevent a Blocked Vent Hood, once a year: 
 
1.  Clean any lint blockage from the exhaust vent hood.
2.  Make sure the vent hood flappers move freely.
3.  Check for screen/grate openings that allow bird or rodent nests.
4.  Replace exhaust vent hood if damaged.
5.  Check for good air flow while running the dryer.
Note: Poor airflow or decreased airflow indicates further vent system cleaning is needed.

Next, I would turn off the breaker for the dryer and leave it off for 3 to 5 minutes.  This sometimes will allow the control board to reset itself.

There are a few items that could of got wet and cause trouble for the dryer.  There is the motor itself which has a motor switch on it.  

This is a gas dryer.  The ignitor is at the bottom and could cause the ignitor not to light.

There are thermostat on the back of the blower fan.  One is called a thermistor key number 1-1 and the other is a thermostat fuse which is key number 1-2.   Both are key items to starting and heating.

I have at the bottom a link to show you the location of the thermostats.   The igntior is at the very bottom and easy to see.   All of these items you can take a multimeter and check for continuity.


thermostat pics for the model 40299032010

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 03, 2014
A:

I have the same model kenmore front loading gas dryer. Mine did not get wet. It simply stopped. The pwer switch turns it on. The door sensor tells me whether the door is open or ready. But when i push the start button, it just goes cleck. The vent is fine, recently cleaned. I will try to unplyug it and replug it to see if it will reset. If it does not, what do you suggest next? Thank you.

Read More
Jon -
December 07, 2015
A:

By the way, the thermostat pictures would not open for me.

Read More
Jon -
December 07, 2015
A:

By the way, the thermostat pictures would not open for me.

Read More
Jon -
December 07, 2015
A:

By the way, the thermostat pictures would not open for me.

Read More
Jon -
December 07, 2015
A:

By the way, the thermostat pictures would not open for me.

Read More
Jon -
December 07, 2015
A:

By the way, the thermostat pictures would not open for me.

Read More
Jon -
December 07, 2015
A:

By the way, the thermostat pictures would not open for me.

Read More
Jon -
December 07, 2015
A:

By the way, the thermostat pictures would not open for me.

Read More
Jon -
December 07, 2015
A:

I need help with my Kenmore H3 front load gas dryer Model number 11092832100 Problem: Dryer turns on but no heat. Cleaned all lint and checked the exhaust and gas line. Checked the following: HIGH LIMIT THERMOSTAT: continuity ok FLAME SWITCH/SENSOR: continuity ok THERMISTOR: continuity ok IGNITOR: continuity ok THERMAL FUSE: open/infinite GAS VALVE COIL/SOLENOID: no reading. REPLACED THE FOLLOWING: THERMAL FUSE GAS VALVE COIL/SOLENOID KIT Did a 25 minute high temperature cycle: everything worked accordingly. The flame initially stayed on for 8 minutes then turned off for 1.5 minutes then flame turned on for 2 minutes then turned off. The flame turned off and on accordingly for the remaining 17 minutes cycle (the flame turned off for 1 minute then on for 2 minutes).

Read More
Alex -
December 08, 2015
See more answers
Q:

11092832100 motor won't run longer than 3 minutes and smells 11092832100 Kenmore Dryer

Q:

dryer motor runs for about 3 minutes then shuts off 11092832100 Kenmore Dryer


Top Parts