Model #11092586400 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake,clutch,gearcase,motor, Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

tub vibration 11092586400 Kenmore Washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
January 14, 2014
Q:

Machine won't empty water. 11092586400 Kenmore Washer

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

I am sorry to hear of the issue with the washer not draining, I know how frustrating that is to have occur.

You say the washer will agitate but not drain, however, you don't mention if it is trying to spin.

The no draining can be a bad pump, a clogged drain line, a clog in the pump, and it can also be a bad lid switch.

If the washer will fill and agitate, the motor is most likely okay. If the washer agitates but doesn't run in drain and spin then I'd suspect the lid switch is at fault.

If the tub is full of water it can be emptied by lowering the drain hose to the ground or into a bucket. As the hose is lowered, water should drain out due to gravity if nothing is clogged. 

Hopefully this helps in narrowing down the troubleshooting. Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.  

 

Read More
Jeff Wallace Sr -
Sears Technician
November 16, 2013
Q:

washer model #110.92586400 shakes when in the spin mode 110.92586400

A:

Thank You for contacting SearsPartsDirect.com

On something like this I recommend pulling the cabinet off for closer inspection. It sounds like the suspension springs, skate plate, balance ring or spin basket could be causing the problem. Please see the images provided that explains how to access the cabinet area so you can run the unit & check the suspension out.

Direct Drive Access[1]

If you need further assistance, please let me know. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
November 03, 2013

Top Parts