Model #11092429100 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Water System
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why is my top load Kenmore washer making a buzzing sound during the spin cycle?

A:

The owner's manual for your exact washer model is not available online. Here is a link for the manual on a similar Kenmore model that should help you with your washer: Use & Care Guide .

If the washer drains but just buzzes and does not spin in the spin cycle (and does not agitate but just buzzes) then the motor coupler is likely broken. This may be a repair that you can complete yourself. I provided the procedure for replacing the motor coupler in the images below. Be sure that you unplug the washer to disconnect electrical power before accessing internal components in the washer. Internal metal edges in the washer can be sharp. Protective gloves are recommended. If it is apparent that the motor coupler is broken, you can order the part from the Sears PartsDirect website. The part number for the motor coupler is 285753A.

Several other problems could cause the washer to buzz when it is in the spin cycle. If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
March 23, 2010
A:

washer fills but won't do anything else

Read More
Francis -
June 05, 2013
See more answers
Q:

Kenmore washer self repair

A:

I know how disappointing it can be when your washer no longer operates as it should. I was able to find a link that includes great information regarding the issue with your washer not agitating. I attached the link below. An expert will respond shortly with a detailed response. I hope this helps.

Read More
Jackie S -
April 22, 2012
A:

I know that it can be very difficult to have issues with your washer. If the washer drains but just buzzes and does not spin in the spin cycle (and does not agitate but just buzzes) then the motor coupler is likely broken. This may be a repair that you can complete yourself. I provided the procedure for replacing the motor coupler in the images below. Be sure that you unplug the washer to disconnect electrical power before accessing internal components in the washer. Internal metal edges in the washer can be sharp. Protective gloves are recommended.

If it is apparent that the motor coupler is broken, you can order the part from the Sears Parts Direct website. There are several other components including the agitator dogs, that could be causing this problem. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
April 24, 2012
See more answers

Top Parts