Model #11092389200 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Braker,clutch,gearcase,motor&pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Loose green wire / water not stopping filling 11092389200

Q:

Model 110 won't stop filling 11092389200 Kenmore Washer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your washer is overfilling.


I recommend checking and replacing the water level switch. The water level switch could be faulty causing your unit to overfill. 

You can roll the console back and make sure the water level switch connections are good and that the pressure hose is connected. 

T
he overfill could be caused by a problem with the pressure switch or a failed inlet water valve assembly. If you shut off the washer and the filling stops then the water level pressure switch (part 3356465) is the likely failed component. 

It could be as simple as the pressure hose being disconnected. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.


Read More
Natasha12 -
Sears Technician
July 27, 2015
Q:

washer won't spin 11092389200 Kenmore Washer

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

The next thing that this could be would be would be either the lid switch and or the timer for this unit. The washer will fill, and agitate but not drain or spin if the lid switch is bad. I would suggest replacing the lid switch and it should solve your issue. If it does not then he timer would be next in line.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
July 18, 2015

Top Parts