Model #11092279100 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Water System
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Gearcase
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Info / manual for Kenmore washer model 110.92279100 110.92279100

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model 110.92279100; the owner’s manual for this model has been discontinued and is no longer available.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
May 20, 2015
A:

Well, truthfully, it's not much help. How does one discontinue a manual--what if I needed a specific part, how would I reference it? And since there is no manual for it, I have no idea of a particular function of this washer: what is the "water return" setting for (located before each wash setting [normal, heavy, permanent press])? Since it does nothing other than turn the agitator on--there is no water filling if selected, so I see no 'water return' happening, and if there IS water in the tub, turning the knob and selecting this 'water return' feature still does nothing. The washer only fills when you select the wash and time setting. It's going to be hard to explain to a potential buyer of this machine what that feature is, if I myself, doesn't know, and especially, since it doesn't work. And no, having a service call put put for a 1987 washer isn't time or money well spent in my opinion. You're the expert, tell me what it does.

Read More
Bil -
May 20, 2015
See more answers
Q:

My Kenmore washer makes a lot of noise on the spin cycle. I've tried to balance the load and it is still quite loud.

A:

I'm sorry to hear that you are having some difficulties with your washer, especially if it is making a lot of noise. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assistance for you.

Read More
Joseph P. -
December 06, 2011
A:

You may be seeing a hole in the tub ring. There are no screws that should be in the top of the tub on this machine that I am aware of. Your details seem to indicate that the tub is banging in the spin cycle. This could be caused by a broken suspension spring or a problem with the components at the base of the washer. The image below shows those components. Here is a link for a repair video that shows how to replace the suspension springs: Washing Machine Suspension Spring Replacement . Unplug the washer before accessing internal components. I recommend that you remove the washer cabinet (with the washer unplugged ) and examine the suspension springs and the base of the washer. If you need to order parts, you can visit the Sears PartsDirect website.

These tips may help you with this washer problem. If you need more assistance, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
December 09, 2011
See more answers
Q:

Why is my Kenmore washer vibrating badly in the spin cycle?

A:

If the washer was not vibrating in the spin cycle before you replaced the motor coupler I suspect a problem in that area. Otherwise vibration in spin could be caused by several different components; skate plate, motor, pump, transmission, basket drive, spin basket or drive block. Please see the images provided below explaining how to make some of these checks.

Read More
biker dave -
Sears Technician
February 11, 2010

Top Parts