Model #11092273800 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

11092273800 spin is not working.why?

A:

I understand how frustrating it can be to have a washing machine not spin. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. I hope the link that I provided is helpful. Have a great day!

Read More
Alina F. -
March 01, 2012
A:

A broken lid switch would prevent the washer from advancing to the drain and spin portion of the cycle. I recommend that you unplug the washer check that component if the motor does not run and the timer does not advance in the spin portion of the cycle. Here is a link for a repair video that shows how to access that lid switch: Washer Lid Switch Replacement . You can place an insulated jumper wire in that harness for the lid switch to bypass it and see if the washer will run in the spin mode if necessary. If the washer runs in the spin mode with that switch bypassed, then replacing that component should fix this problem. You can order that switch from the Sears PartsDirect website. The part number is 285671. Here is a direct link for that part: Lid Switch .

If the motor runs and the washer drains but the basket will not spin, you could have a bad clutch or a problem with the basket drive. Several other failures could prevent the washer from spinning if the motor is running. Reply with additional details if you need more help with this problem.

If you get to the point where you need to have a service technician repair this spin failure, you can schedule service through this link: Sears Home Services .

Read More
Lyle W -
Sears Technician
March 02, 2012
A:

the motor runs put the gasket is not spinning,lots of black belt like residue on floor may need belt cant get help from sears on parts can you do it yourself ???

Read More
gottfried -
December 10, 2015
See more answers
Q:

Do I need a timer motor for my washing machine malfunction? 110.92273800

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model110.92273800; it sound like the timer may need to be replaced. The timer allows the washer to successfully advance thru its cycles until the selected cycle is completed.  When the timer fails it can cause the washer to stop before the selected cycle is completed. I have posted a link of the timer to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 14, 2015
Q:

how do you remove the agitator cam assembly? 11092273800 Kenmore Washer

A:

Thank You for contacting SearsPartsDirect.com
I do apologize for the delay in answering your question.

I understand your frustration with your washer not working correctly. I have included a video below that will help you with replacing the cam and dogs. Click on the blue link below to be taken to the page.

Video - How to replace agitator cam and dogs

If you need further assistance, please let me know. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
December 02, 2013

Top Parts