Model #11092273100 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Miscellaneous
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

my washer is aggitating me 11092273100 Kenmore Washer

A:

Multiple issues could cause this problem, Timer, Lid Swith, Loose Wires.  I would suggest a Technician for your needs based on your discription of the problem. 1-800-469-4663 

Read More
Jeffrey8673 -
Sears Technician
November 03, 2015
A:

Our washer agitates with no clothes but not with clothes

Read More
tim -
November 04, 2015
See more answers
Q:

top half of agitator 11092273100 Kenmore Washer

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your washer will not agitate. I did look into the model number you have provided and I do recommend checking the agitator dogs. They allow the top half to agitate back and forth. Click here to view. 
I have attached the photo on how to get to the agitator dogs. 

Let me know if this helps. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .


Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
April 28, 2014
A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your washer will not agitate. I did look into the model number you have provided and I do recommend checking the agitator dogs. They allow the top half to agitate back and forth. Click here to view. 
I have attached the photo on how to get to the agitator dogs. 

Let me know if this helps. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .


Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
April 28, 2014
See more answers
Q:

Washer will not spin or agitate but motor is running. 11092273100 Kenmore Washer

A:

Thank You for contacting SearsPartsDirect.com. I do apologize for the delay in answering your question.

I am sorry you are having problems with your washer.

You most likely have a bad lid switch. You can bypass the lid switch. 

Unplug the washer, gain access to the lid switch, and disconnect the lid switch connector. Place an insulated piece of wire between the grey and white wires in the connector. Plug the washer back in and see if the motor will run. If the motor runs and there is not an issue with the hinge mechanism, replace the lid switch.

Do not leave the lid switch bypassed, this is for testing only.

If you need further assistance please respond below. Thanks for visiting SearsPartsDirect.com

Read More
Desirea -
Sears Technician
April 05, 2014

Top Parts