Model #11088722892 KENMORE Residential Dryer

  • Bulkhead
    3 Results
  • Cabinet
    3 Results
  • Top And Console
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


burning rubber smell 11088722892 Kenmore Compact electric dryer


Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11088722892; it sounds like the belt on the dryer may be wearing out causing the rubber burnt smell. I recommend that you unplug the dryer and check the belt it may need to be replaced. I have posted a link of the belt to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
July 02, 2015

I have a kenmore dryer front load #110.88722892. I get a reading of 120 degrees. I was told that it should be reading between 135-165. What part would I need to


I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Priscilla V -
December 21, 2011

Thank you for your question and I understand your concern.

This model of dryer runs on 120 volts instead of 240 volts AC. This will limit the drying capacity due to the lower wattage of the heating element. Your dryer has a 1200 watt heater element. The 240 volt dryers have a 5400 watt heating element. They can get much hotter and dry the clothes much quicker.

This means it will not get as hot a conventional 220-240 volt dryer and it will take twice as long to dry a load of clothes. I recommend checking the venting system also for any kinks or restrictions because it can cause longer dry times as well.

Your dryer will not likely ever reach a temperature over 120 degrees. This is one of the down falls with a 110-120 volt dryer. The dryer only has a 1200 watt heating element which is the same wattage ratting as most hair dryers. Some hair dryers can be as high as 1500 watts which would produce higher temperatures than your dryer. So, with this said there is nothing likely wrong with your dryer and again; it will not likely reach above 120 degrees at the exhaust.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
December 22, 2011
See more answers

Top Parts

Recommended maintenance parts & accessories

Show 3 more
No more item to show