Model #11087980100 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Timer will not advance 110.87980100

Q:

Model # 11087980100 Gas Dryer 11087980100 Kenmore Gas dryer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dryer will not advance.

I have attached the wiring diagram to test your parts. 

It could also be the power resistor inside the control panel next to the timer. Resistor is a black rectangular object with two terminals on it. Disconnect the wires from it and check resistance across the resistor. Should read around 4000-5000 ohms.
 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 16, 2015
A:
Natasha12 -
Sears Technician
August 16, 2015
A:

Natasha12 the timer will advance on all settings EXCEPT at the Automatic Fabric Care setting. Everything works except this ONE setting the dryer dries and spins and everthing else that it is suppose to do except the TIMER will not advance from the AUTOMATIC FABRIC CARE setting. Thanks JCB

Read More
J C -
August 17, 2015
A:

That is not the wiring diagram for my model dryer.

Read More
J C -
August 17, 2015
See more answers
Q:

dryer won't heat 11087980100 Kenmore Gas dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model 11087980100; it sounds like there could be a thermostat malfunctioning. Try to relight the unit. If it doesn’t relight right away then it could be gas valve solenoid issue. If the unit relights but turns off then it could be a thermostat issue.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
March 24, 2015

Top Parts